CWE-521

Jfrog Artifactory uses default passwords (such as "password") for administrative accounts and does not require users to change them. This may allow unauthorized network-based attackers to completely compromise of Jfrog Artifactory. This issue affects Jfrog Artifactory versions prior to 6.17.0.

RuggedCom Rugged Operating System (ROS) before 3.3 has a factory account with a password derived from the MAC Address field in a banner, which makes it easier for remote attackers to obtain access by performing a calculation on this address value, and then establishing a (1) SSH or (2) HTTPS session, a different vulnerability than CVE-2012-1803.

ACTi cameras including the D, B, I, and E series using firmware version A1D-500-V6.11.31-AC use non-random default credentials across all devices. A remote attacker can take complete control of a device using default admin credentials.

UnboundID LDAP SDK version from commit 801111d8b5c732266a5dbd4b3bb0b6c7b94d7afb up to commit 8471904a02438c03965d21367890276bc25fa5a6, where the issue was reported and fixed contains an Incorrect Access Control vulnerability in process function in SimpleBindRequest class doesn't check for empty password when running in synchronous mode. commit with applied fix https://github.com/pingidentity/ldapsdk/commit/8471904a02438c03965d21367890276bc25fa5a6#diff-f6cb23b459be1ec17df1da33760087fd that can result in Ability to impersonate any valid user. This attack appear to be exploitable via Providing valid username and empty password against servers that do not do additional validation as per https://tools.ietf.org/html/rfc4513#section-5.1.1. This vulnerability appears to have been fixed in after commit 8471904a02438c03965d21367890276bc25fa5a6.

TeamViewer Desktop through 14.7.1965 allows a bypass of remote-login access control because the same key is used for different customers' installations. It used a shared AES key for all installations since at least as far back as v7.0.43148, and used it for at least OptionsPasswordAES in the current version of the product. If an attacker were to know this key, they could decrypt protect information stored in the registry or configuration files of TeamViewer. With versions before v9.x , this allowed for attackers to decrypt the Unattended Access password to the system (which allows for remote login to the system as well as headless file browsing). The latest version still uses the same key for OptionPasswordAES but appears to have changed how the Unattended Access password is stored. While in most cases an attacker requires an existing session on a system, if the registry/configuration keys were stored off of the machine (such as in a file share or online), an attacker could then decrypt the required password to login to the system.

Trend Micro InterScan Web Security Virtual Appliance (IWSVA) 6.5 before CP 1746 mismanages certain key and certificate data. Per IWSVA documentation, by default, IWSVA acts as a private Certificate Authority (CA) and dynamically generates digital certificates that are sent to client browsers to complete a secure passage for HTTPS connections. It also allows administrators to upload their own certificates signed by a root CA. An attacker with low privileges can download the current CA certificate and Private Key (either the default ones or ones uploaded by administrators) and use those to decrypt HTTPS traffic, thus compromising confidentiality. Also, the default Private Key on this appliance is encrypted with a very weak passphrase. If an appliance uses the default Certificate and Private Key provided by Trend Micro, an attacker can simply download these and decrypt the Private Key using the default/weak passphrase.

The Epson "EasyMP" software is designed to remotely stream a users computer to supporting projectors.These devices are authenticated using a unique 4-digit code, displayed on-screen - ensuring only those who can view it are streaming.All Epson projectors supporting the "EasyMP" software are vulnerable to a brute-force vulnerability, allowing any attacker on the network to remotely control and stream to the vulnerable device

The Internet Key Exchange v1 main mode is vulnerable to offline dictionary or brute force attacks. Reusing a key pair across different versions and modes of IKE could lead to cross-protocol authentication bypasses. It is well known, that the aggressive mode of IKEv1 PSK is vulnerable to offline dictionary or brute force attacks. For the main mode, however, only an online attack against PSK authentication was thought to be feasible. This vulnerability could allow an attacker to recover a weak Pre-Shared Key or enable the impersonation of a victim host or network.

In IQrouter through 3.3.1, the Lua function reset_password in the web-panel allows remote attackers to change the root password arbitrarily. Note: The vendor claims that this vulnerability can only occur on a brand-new network that, after initiating the forced initial configuration (which has a required step for setting a secure password on the system), makes this CVE invalid. This vulnerability is “true for any unconfigured release of OpenWRT, and true of many other new Linux distros prior to being configured for the first time”

An improper access control vulnerability in Fortinet FortiWebManager 5.8.0 allows anyone that can access the admin webUI to successfully log-in regardless the provided password.

A Weak Password Requirements issue was discovered in Rockwell Automation Allen-Bradley MicroLogix 1100 programmable-logic controllers 1763-L16AWA, Series A and B, Version 16.00 and prior versions; 1763-L16BBB, Series A and B, Version 16.00 and prior versions; 1763-L16BWA, Series A and B, Version 16.00 and prior versions; and 1763-L16DWD, Series A and B, Version 16.00 and prior versions and Allen-Bradley MicroLogix 1400 programmable logic controllers 1766-L32AWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWA, Series A and B, Version 16.00 and prior versions; 1766-L32BWAA, Series A and B, Version 16.00 and prior versions; 1766-L32BXB, Series A and B, Version 16.00 and prior versions; 1766-L32BXBA, Series A and B, Version 16.00 and prior versions; and 1766-L32AWAA, Series A and B, Version 16.00 and prior versions. The affected products use a numeric password with a small maximum character size for the password.

Versions of the Official registry Docker images through 2.7.0 contain a blank password for the root user. Systems deployed using affected versions of the registry container may allow a remote attacker to achieve root access with a blank password.

IBM Security Guardium 10.0, 10.0.1, and 10.1 through 10.1.4 Database Activity Monitor does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 132624.

A vulnerability in the web portal of the Cisco Prime Collaboration Provisioning Tool could allow an unauthenticated, remote attacker to create a denial of service (DoS) condition for individual users. The vulnerability is due to weak login controls. An attacker could exploit this vulnerability by using a brute-force attack (Repeated Bad Login Attempts). A successful exploit could allow the attacker to restrict user access. Manual administrative intervention is required to restore access. Cisco Bug IDs: CSCvd07264.

Askey AP5100W_Dual_SIG_1.01.097 and all prior versions use a weak password at the Operating System (rlx-linux) level. This allows an attacker to gain unauthorized access as an admin or root user to the device Operating System via Telnet or SSH.

Western Digital My Cloud, My Cloud Mirror Gen2, My Cloud EX2 Ultra, My Cloud EX2100, My Cloud EX4100, My Cloud DL2100, My Cloud DL4100, My Cloud PR2100 and My Cloud PR4100 firmware before 2.31.174 is affected by an authentication bypass vulnerability. The login_mgr.cgi file checks credentials against /etc/shadow. However, the "nobody" account (which can be used to access the control panel API as a low-privilege logged-in user) has a default empty password, allowing an attacker to modify the My Cloud EX2 Ultra web page source code and obtain access to the My Cloud as a non-Admin My Cloud device user.

IBM Security Guardium Big Data Intelligence (SonarG) 3.1 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 137772.

Weak Password Requirements in GitHub repository polonel/trudesk prior to 1.2.2.

A flaw was found in Samba, all versions starting samba 4.5.0 before samba 4.9.15, samba 4.10.10, samba 4.11.2, in the way it handles a user password change or a new password for a samba user. The Samba Active Directory Domain Controller can be configured to use a custom script to check for password complexity. This configuration can fail to verify password complexity when non-ASCII characters are used in the password, which could lead to weak passwords being set for samba users, making it vulnerable to dictionary attacks.

IBM Security Identity Manager 6.0.0 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 153628.

IBM Security Guardium 10.0, 10.0.1, 10.1, 10.1.2, 10.1.3, 10.1.4, and 10.5 Database Activity Monitor does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 132610.

Ansible Tower before version 3.2.4 has a flaw in the management of system and organization administrators that allows for privilege escalation. System administrators that are members of organizations can have their passwords reset by organization administrators, allowing organization administrators access to the entire system.

An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The ftpuser1 account has a blank password, which cannot be changed.

IBM Tivoli Key Lifecycle Manager does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 184181.

Weak default password cause vulnerability in SonicWall Email Security appliance which leads to attacker gain access to appliance database. This vulnerability affected Email Security Appliance version 10.0.2 and earlier.

Siyucms v6.1.7 was discovered to contain a remote code execution (RCE) vulnerability in the background. SIYUCMS is a content management system based on ThinkPaP5 AdminLTE. SIYUCMS has a background command execution vulnerability, which can be used by attackers to gain server privileges

An issue was discovered in Kaseya Unitrends Backup Appliance before 10.5.5. The password for the PostgreSQL wguest account is weak.

An issue was discovered on Moxa MGate MB3170 and MB3270 devices before 4.1, MB3280 and MB3480 devices before 3.1, MB3660 devices before 2.3, and MB3180 devices before 2.1. Insufficient password requirements for the MGate web application may allow an attacker to gain access by brute-forcing account passwords.

Weak default root user credentials allow remote attackers to easily obtain OS superuser privileges over the open TCP port for SSH.

Weak Password Reset Rules vulnerabilities where found providing a potiential for the storage of weak passwords that could facilitate unauthorized admin/application access.  Affected products: ABB ASPECT - Enterprise v3.07.02; NEXUS Series v3.07.02; MATRIX Series v3.07.02

An issue discovered in Pfsense CE version 2.6.0 allows attackers to compromise user accounts via weak password requirements.

An issue was discovered in SMA Solar Technology products. All inverters have a very weak password policy for the user and installer password. No complexity requirements or length requirements are set. Also, strong passwords are impossible due to a maximum of 12 characters and a limited set of characters. NOTE: the vendor reports that the 12-character limit provides "a very high security standard." Also, only Sunny Boy TLST-21 and TL-21 and Sunny Tripower TL-10 and TL-30 could potentially be affected

A weak password vulnerability was discovered in Enphase Envoy R3.*.*. One can login via TCP port 8888 with the admin password for the admin account.

IBM BigFix Compliance (TEMA SUAv1 SCA SCM) 1.9.70 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 123671.

The OKLOK (3.1.1) mobile companion app for Fingerprint Bluetooth Padlock FB50 (2.3) has weak password requirements combined with improper restriction of excessive authentication attempts, which could allow a remote attacker to discover user credentials and obtain access via a brute force attack.

IBM Tivoli Endpoint Manager (IBM BigFix 9.2 and 9.5) does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 123861.

A vulnerability in the Gleez CMS 1.2.0 login page could allow an unauthenticated, remote attacker to perform multiple user enumerations, which can further help an attacker to perform login attempts in excess of the configured login attempt limit. The vulnerability is due to insufficient server-side access control and login attempt limit enforcement. An attacker could exploit this vulnerability by sending modified login attempts to the Portal login page. An exploit could allow the attacker to identify existing users and perform brute-force password attacks on the Portal, as demonstrated by navigating to the user/4 URI.

A vulnerability has been identified in SINEMA Remote Connect Server (All versions < V2.0 SP1). The web interface has no means to prevent password guessing attacks. The vulnerability could be exploited by an attacker with network access to the vulnerable software, requiring no privileges and no user interaction. The vulnerability could allow full access to the web interface. At the time of advisory publication no public exploitation of this security vulnerability was known.

An issue was discovered on D-Link DIR-825 Rev.B 2.10 devices. The "user" account has a blank password.

A Credentials Management issue was discovered in Moxa NPort W2150A versions prior to 1.11, and NPort W2250A versions prior to 1.11. The default password is empty on the device. An unauthorized user can access the device without a password. An unauthorized user has the ability to completely compromise the confidentiality and integrity of the wireless traffic.

An issue in the password change function of Silverpeas v6.4.2 and lower allows for the bypassing of password complexity requirements.

gpw generates shorter passwords than required

Iteris Vantage Velocity Field Unit 2.3.1 and 2.4.2 devices have two users that are not documented and are configured with weak passwords (User bluetooth, password bluetooth; User eclipse, password eclipse). Also, bluetooth is the root password.

IBM Security Key Lifecycle Manager 3.0 and 3.0.1 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 166626.

IBM Security Privileged Identity Manager Virtual Appliance 2.2.1 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 145236.

IBM Intelligent Operations Center V5.1.0 - V5.2.0, IBM Intelligent Operations Center for Emergency Management V5.1.0 - V5.1.0.6, and IBM Water Operations for Waternamics V5.1.0 - V5.2.1.1 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 161201.

IBM PureApplication System 2.2.3.0 through 2.2.5.3 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 159417.

IBM Intelligent Operations Center (IOC) 5.1.0 through 5.2.0 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 157012.

An issue was discovered in Infiray IRAY-A8Z3 1.0.957. There is a blank root password for TELNET by default.

Trend Micro Mobile Security for Android (Consumer) versions 10.3.1 and below on Android 8.0+ has an issue in which an attacker could bypass the product's App Password Protection feature.

RSA Archer, versions prior to 6.6 P2 (6.6.0.2), contain an improper authentication vulnerability. The vulnerability allows sysadmins to create user accounts with insufficient credentials. Unauthenticated attackers could gain unauthorized access to the system using those accounts.

Baseon Lantronix MSS devices do not require a password for TELNET access.

In Canon LBP223 printers, the System Manager Mode login does not require an account password or PIN. An attacker can remotely shut down the device after entering the background, creating a denial of service vulnerability.

Verizon 4G LTE Network Extender GA4.38 - V0.4.038.2131 utilizes a weak default admin password generation algorithm which generates passwords that are accessible to unauthenticated attackers via the webUI login page.

The NETGEAR Insight application before 2.42 for Android and iOS is affected by password mismanagement.

NeuVector 3.1 when configured to allow authentication via Active Directory, does not enforce non-empty passwords which allows an attacker with access to the Neuvector portal to authenticate as any valid LDAP user by providing a valid username and an empty password (provided that the active directory server has not been configured to reject empty passwords).

IBM Cognos Analytics 11.1.7 and 11.2.0 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 196339.

MLflow Weak Password Requirements Authentication Bypass Vulnerability. This vulnerability allows remote attackers to bypass authentication on affected installations of MLflow. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of passwords. The issue results from weak password requirements. An attacker can leverage this vulnerability to bypass authentication on the system. Was ZDI-CAN-26916.

An access control vulnerability in Hame SD1 Wi-Fi firmware <=V.20140224154640 allows an attacker to get system administrator through an open Telnet service.

An issue was discovered in Luvion Grand Elite 3 Connect through 2020-02-25. Authentication to the device is based on a username and password. The root credentials are the same across all devices of this model.

The telnet administrator service running on port 650 on Gigaset DX600A v41.00-175 devices does not implement any lockout or throttling functionality. This situation (together with the weak password policy that forces a 4-digit password) allows remote attackers to easily obtain administrative access via brute-force attacks.

An issue was discovered on MOBOTIX S14 MX-V4.2.1.61 devices. /admin/access accepts a request to set the "aaaaa" password, considered insecure for some use cases, from a user.

In OpenEMR, versions 5.0.0 to 6.0.0.1 are vulnerable to weak password requirements as it does not enforce a maximum password length limit. If a malicious user is aware of the first 72 characters of the victim user’s password, he can leverage it to an account takeover.

etcd before versions 3.3.23 and 3.4.10 does not perform any password length validation, which allows for very short passwords, such as those with a length of one. This may allow an attacker to guess or brute-force users' passwords with little computational effort.

The National Payments Corporation of India BHIM application 1.3 for Android relies on a four-digit passcode, which makes it easier for attackers to obtain access.

In Moxa PT-7528 series firmware, Version 4.0 or lower, and PT-7828 series firmware, Version 3.9 or lower, the application utilizes weak password requirements, which may allow an attacker to gain unauthorized access.

A privileged account with a weak default password on the Foxconn femtocell FEMTO AP-FC4064-T version AP_GT_B38_5.8.3lb15-W47 LTE Build 15 can be used to turn on the TELNET service via the web interface, which allows root login without any password. This vulnerability will lead to full system compromise and disclosure of user communications. The foxconn account with an 8-character lowercase alphabetic password can be used.

Lazy Mouse server enforces weak password requirements and doesn't implement rate limiting, allowing remote unauthenticated users to easily and quickly brute force the PIN and execute arbitrary commands. CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H

In cPanel before 88.0.3, an insecure site password is used for Mailman on a templated VM (SEC-551).

Renato v0.17.0 employs weak password complexity requirements, allowing attackers to crack user passwords via brute-force attacks.

The TIBCO EBX Web Server component of TIBCO Software Inc.'s TIBCO EBX, TIBCO EBX, TIBCO EBX, and TIBCO Product and Service Catalog powered by TIBCO EBX contains a vulnerability that under certain specific conditions allows an attacker to enter a password other than the legitimate password and it will be accepted as valid. Affected releases are TIBCO Software Inc.'s TIBCO EBX: versions 5.8.123 and below, TIBCO EBX: versions 5.9.3, 5.9.4, 5.9.5, 5.9.6, 5.9.7, 5.9.8, 5.9.9, 5.9.10, 5.9.11, 5.9.12, 5.9.13, and 5.9.14, TIBCO EBX: versions 6.0.0 and 6.0.1, and TIBCO Product and Service Catalog powered by TIBCO EBX: version 1.0.0.

In Moxa EDS-G516E Series firmware, Version 5.2 or lower, weak password requirements may allow an attacker to gain access using brute force.

A CWE-521: Weak Password Requirements vulnerability exists in Easergy Builder (Version 1.4.7.2 and older) which could allow an attacker to compromise a user account.

IBM QRadar Network Packet Capture 7.3.0 - 7.3.3 Patch 1 and 7.4.0 GA does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 166803.

Missing password strength checks on some forms in Plone 4.3 through 5.2.0 allow users to set weak passwords, leading to easier cracking.

The built-in web service for MOXA NPort IAW5000A-I/O firmware version 2.1 or lower does not require users to have strong passwords.

Weak Password Requirements vulnerability in Apache Software Foundation Apache InLong.This issue affects Apache InLong: from 1.1.0 through 1.6.0.  When users change their password to a simple password (with any character or symbol), attackers can easily guess the user's password and access the account. Users are advised to upgrade to Apache InLong's 1.7.0 or cherry-pick https://github.com/apache/inlong/pull/7805 https://github.com/apache/inlong/pull/7805 to solve it.

IBM Security Identity Governance and Intelligence 5.2.6 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 175423.

An issue was discovered in AvertX Auto focus Night Vision HD Indoor/Outdoor IP Dome Camera HD838 and Night Vision HD Indoor/Outdoor Mini IP Bullet Camera HD438. They do not require users to change the default password for the admin account. They only show a pop-up window suggesting a change but there's no enforcement. An administrator can click Cancel and proceed to use the device without changing the password. Additionally, they disclose the default username within the login.js script. Since many attacks for IoT devices, including malware and exploits, are based on the usage of default credentials, it makes these cameras an easy target for malicious actors.

I-doit pro 25 and below and I-doit open 25 and below employ weak password requirements for Administrator account creation. Attackers are able to easily guess users' passwords via a bruteforce attack.

BAB TECHNOLOGIE GmbH eibPort V3. Each device has its own unique hard coded and weak root SSH key passphrase known as 'eibPort string'. This is usable and the final part of an attack chain to gain SSH root access.

A vulnerability, which was classified as problematic, was found in PMWeb 7.2.0. This affects an unknown part of the component Setting Handler. The manipulation leads to weak password requirements. It is possible to initiate the attack remotely. The complexity of an attack is rather high. The exploitability is told to be difficult. The exploit has been disclosed to the public and may be used. It is recommended to change the configuration settings. The vendor was contacted early about this disclosure but did not respond in any way.

A weak password requirement vulnerability exists in the Create New User function of MintHCM RELEASE 3.0.8, which could lead an attacker to easier password brute-forcing.

Pulse Secure Desktop Client 9.0Rx before 9.0R5 and 9.1Rx before 9.1R4 on Windows reveals users' passwords if Save Settings is enabled.

IBM API Connect 5.0.0.0 could allow a user to bypass policy restrictions and create non-compliant passwords which could be intercepted and decrypted using man in the middle techniques. IBM X-Force ID: 127160.

Airangel HSMX Gateway devices through 5.2.04 have Weak SSH Credentials.

A CWE-521: Weak Password Requirements vulnerability exists in the GP-Pro EX V1.00 to V4.09.100 which could cause the discovery of the password when the user is entering the password because it is not masqueraded.

Weak Password Requirements in GitHub repository thorsten/phpmyfaq prior to 3.1.8.

The weak password on the web user interface can be exploited via HTTP or HTTPS. Once such access has been obtained, the other passwords can be changed. The weak password on Linux accounts can be accessed via SSH or Telnet, the former of which is by default enabled on trusted interfaces. While the SSH service does not support root login, a user logging in using either of the other Linux accounts may elevate to root access using the su command if they have access to the associated password.

In Auto-Maskin RP210E Versions 3.7 and prior, DCU210E Versions 3.7 and prior and Marine Observer Pro (Android App), the software contains a mechanism for users to recover or change their passwords without knowing the original password, but the mechanism is weak.

In Daybyday CRM, versions 1.1 through 2.2.0 enforce weak password requirements in the user update functionality. A user with privileges to update his password could change it to a weak password, such as those with a length of a single character. This may allow an attacker to brute-force users’ passwords with minimal to no computational effort.

InHand Networks IR615 Router's Versions 2.3.0.r4724 and 2.3.0.r4870 does not enforce an efficient password policy. This may allow an attacker with obtained user credentials to enumerate passwords and impersonate other application users and perform operations on their behalf.

Open Dental before version 18.4 installs a mysql database and uses the default credentials of "root" with a blank password. This allows anyone on the network with access to the server to access all database information.

Mealie 1.0.0beta3 employs weak password requirements which allows attackers to potentially gain unauthorized access to the application via brute-force attacks.

On Dell 2335dn printers with Printer Firmware Version 2.70.05.02, Engine Firmware Version 1.10.65, and Network Firmware Version V4.02.15(2335dn MFP) 11-22-2010, the admin interface allows an authenticated attacker to retrieve the configured SMTP or LDAP password by viewing the HTML source code of the Email Settings webpage. In some cases, authentication can be achieved with the blank default password for the admin account. NOTE: the vendor indicates that this is an "End Of Support Life" product.

A vulnerability was found in PHPGurukul Employee Leaves Management System 1.0. It has been declared as problematic. Affected by this vulnerability is an unknown functionality of the file changepassword.php. The manipulation of the argument newpassword/confirmpassword leads to weak password requirements. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The identifier VDB-220021 was assigned to this vulnerability.

Use of weak credentials exists in Seiko Solutions SkyBridge and SkySpider series, which may allow a remote unauthenticated attacker to decrypt password for the WebUI of the product. Affected products and versions are as follows: SkyBridge MB-A200 firmware Ver. 01.00.05 and earlier, SkyBridge BASIC MB-A130 firmware Ver. 1.4.1 and earlier, and SkySpider MB-R210 firmware Ver. 1.01.00 and earlier.

Weak Password Requirements in GitHub repository ikus060/minarca prior to 4.2.2.

IBM Maximo Asset Management 7.6.1.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 210892.

BAB TECHNOLOGIE GmbH eibPort V3 prior version 3.9.1 allow the user to set a weak password because the strength is shown in configuration tool, but finally not enforced. This is usable and part of an attack chain to gain SSH root access.

Supportlink CLI in Brocade Fabric OS Versions v8.2.1 through v8.2.1d, and 8.2.2 versions before v8.2.2c does not obfuscate the password field, which could expose users’ credentials of the remote server. An authenticated user could obtain the exposed password credentials to gain access to the remote host.

Weak Password Requirements in GitHub repository kromitgmbh/titra prior to 0.78.1.

IBM Security Guardium 11.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 196279.

Dell PowerScale OneFS versions 8.2.0.x through 9.3.0.x, contain a weak password requirement vulnerability. An administrator may create an account with no password. A remote attacker may potentially exploit this leading to a user account compromise.

A vulnerability was found in SourceCodester Engineers Online Portal 1.0 and classified as problematic. This issue affects some unknown processing of the file signup_teacher.php. The manipulation of the argument Password leads to weak password requirements. The attack may be initiated remotely. The complexity of an attack is rather high. The exploitation is known to be difficult. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-250115.

ECOA BAS controller uses weak set of default administrative credentials that can be easily guessed in remote password attacks and gain full control of the system.

Weak password requirements in Blaauw Remote Kiln Control through v3.00r4 allow a user to set short or guessable passwords (e.g., 1 or 1234).

An authentication bypass (account takeover) vulnerability exists in Premiumdatingscript 4.2.7.7 due to a weak password reset mechanism in requests\user.php.

A lack of password length restriction in Zammad v5.1.0 allows for the creation of extremely long passwords which can cause a Denial of Service (DoS) during password verification.

D-Link DSL6740C v6.TR069.20211230 was discovered to use insecure default credentials for Administrator access, possibly allowing attackers to bypass authentication and escalate privileges on the device via a bruteforce attack.

An issue was discovered in Mattermost Server before 3.2.0. It mishandles brute-force attempts at password change.

The LoMag WareHouse Management application version 1.0.20.120 and older were found to allow weak passwords. By default, hard-coded passwords of 10 characters with little or no complexity are allowed.

An empty password in configuration file vulnerability [CWE-258] in FortiNAC version 8.3.7 and below, 8.5.2 and below, 8.5.4, 8.6.0, 8.6.5 and below, 8.7.6 and below, 8.8.11 and below, 9.1.5 and below, 9.2.3 and below may allow an authenticated attacker to access the MySQL databases via the CLI.

Hikvision Streaming Media Management Server v2.3.5 uses default credentials that allow remote attackers to authenticate and access restricted functionality. After authenticating with these credentials, an attacker can exploit an arbitrary file read vulnerability in the /systemLog/downFile.php endpoint via directory traversal in the fileName parameter. This exploit chain can enable unauthorized access to sensitive system files.

The Voatz application 2020-01-01 for Android allows only 100 million different PINs, which makes it easier for attackers (after using root access to make a copy of the local database) to discover login credentials and voting history via an offline brute-force approach.

Weak Password Requirements vulnerability in FTP function on Mitsubishi Electric Corporation MELSEC iQ-R Series EtherNet/IP module RJ71EIP91 and MELSEC iQ-F Series EtherNet/IP module FX5-ENET/IP allows a remote unauthenticated attacker to access to the module via FTP by dictionary attack or password sniffing.

Use of weak credentials exists in SkyBridge MB-A100/110 firmware Ver. 4.2.0 and earlier, which may allow a remote unauthenticated attacker to decrypt password for the WebUI of the product.

IBM Security Guardium Data Encryption (GDE) 3.0.0.2 does not require that users should have strong passwords by default, which makes it easier for attackers to compromise user accounts. IBM X-Force ID: 171929.

eSOMS versions 4.0 to 6.0.3 do not enforce password complexity settings, potentially resulting in lower access security due to insecure user passwords.

Weak password requirements issue exists in CHOCO TEI WATCHER mini (IB-MCT001) all versions. If this issue is exploited, a brute-force attack may allow an attacker unauthorized access and login.

Nextcloud Server is an open source personal cloud server. Prior to versions 23.0.11, 24.0.7, and 25.0.0, there is no password length limit when creating a user as an administrator. An administrator can cause a limited DoS attack against their own server. Versions 23.0.11, 24.0.7, and 25.0.0 contain a fix for the issue. As a workaround, don't create user accounts with long passwords.

BF-OS version 3.x up to and including 3.83 do not enforce strong passwords which may allow a remote attacker to brute-force the device password.

In Textpattern 4.5.7, the password-reset feature does not securely tether a hash to a user account.

Philips iSite and IntelliSpace PACS, iSite PACS, all versions, and IntelliSpace PACS, all versions. Default credentials and no authentication within third party software may allow an attacker to compromise a component of the system.

YMS VIS Pro is an information system for veterinary and food administration, veterinarians and farm. Due to a combination of improper method for system credentials generation and weak password policy, passwords can be easily guessed and enumerated through brute force attacks. Successful attacks can lead to unauthorised access and execution of operations based on assigned user permissions. This vulnerability affects VIS Pro in versions <= 3.3.0.6. This vulnerability has been mitigated by changes in authentication mechanisms and implementation of additional authentication layer and strong password policies.