CWE-354

The SSH transport protocol with certain OpenSSH extensions, found in OpenSSH before 9.6 and other products, allows remote attackers to bypass integrity checks such that some packets are omitted (from the extension negotiation message), and a client and server may consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack. This occurs because the SSH Binary Packet Protocol (BPP), implemented by these extensions, mishandles the handshake phase and mishandles use of sequence numbers. For example, there is an effective attack against SSH's use of ChaCha20-Poly1305 (and CBC with Encrypt-then-MAC). The bypass occurs in chacha20-poly1305@openssh.com and (if CBC is used) the -etm@openssh.com MAC algorithms. This also affects Maverick Synergy Java SSH API before 3.1.0-SNAPSHOT, Dropbear through 2022.83, Ssh before 5.1.1 in Erlang/OTP, PuTTY before 0.80, AsyncSSH before 2.14.2, golang.org/x/crypto before 0.17.0, libssh before 0.10.6, libssh2 through 1.11.0, Thorn Tech SFTP Gateway before 3.4.6, Tera Term before 5.1, Paramiko before 3.4.0, jsch before 0.2.15, SFTPGo before 2.5.6, Netgate pfSense Plus through 23.09.1, Netgate pfSense CE through 2.7.2, HPN-SSH through 18.2.0, ProFTPD before 1.3.8b (and before 1.3.9rc2), ORYX CycloneSSH before 2.3.4, NetSarang XShell 7 before Build 0144, CrushFTP before 10.6.0, ConnectBot SSH library before 2.2.22, Apache MINA sshd through 2.11.0, sshj through 0.37.0, TinySSH through 20230101, trilead-ssh2 6401, LANCOM LCOS and LANconfig, FileZilla before 3.66.4, Nova before 11.8, PKIX-SSH before 14.4, SecureCRT before 9.4.3, Transmit5 before 5.10.4, Win32-OpenSSH before 9.5.0.0p1-Beta, WinSCP before 6.2.2, Bitvise SSH Server before 9.32, Bitvise SSH Client before 9.33, KiTTY through 0.76.1.13, the net-ssh gem 7.2.0 for Ruby, the mscdex ssh2 module before 1.15.0 for Node.js, the thrussh library before 0.35.1 for Rust, and the Russh crate before 0.40.2 for Rust.

A tampering vulnerability exists in Microsoft Windows when a man-in-the-middle attacker is able to successfully bypass the NTLM MIC (Message Integrity Check) protection, aka 'Windows NTLM Tampering Vulnerability'.

RADIUS Protocol under RFC 2865 is susceptible to forgery attacks by a local attacker who can modify any valid Response (Access-Accept, Access-Reject, or Access-Challenge) to any other response using a chosen-prefix collision attack against MD5 Response Authenticator signature.

An issue was discovered in the ALFA Windows 10 driver 6.1316.1209 for AWUS036H. The Wi-Fi implementation does not verify the Message Integrity Check (authenticity) of fragmented TKIP frames. An adversary can abuse this to inject and possibly decrypt packets in WPA or WPA2 networks that support the TKIP data-confidentiality protocol.

In Wireshark 3.2.0 to 3.2.6, 3.0.0 to 3.0.13, and 2.6.0 to 2.6.20, the TCP dissector could crash. This was addressed in epan/dissectors/packet-tcp.c by changing the handling of the invalid 0xFFFF checksum.

An issue was discovered in Zoho ManageEngine AssetExplorer 6.5. During an upgrade of the Windows agent, it does not validate the source and binary downloaded. This allows an attacker on an adjacent network to execute code with NT AUTHORITY/SYSTEM privileges on the agent machines by providing an arbitrary executable via a man-in-the-middle attack.

A security feature bypass exists when Windows incorrectly validates CAB file signatures. An attacker who successfully exploited this vulnerability could inject code into a CAB file without invalidating the file's signature. To exploit the vulnerability, an attacker could modify a signed CAB file and inject malicious code. The attacker could then convince a target user to execute the file. The update addresses the vulnerability by correcting how Windows validates file signatures.

FRRouting FRR 7.5.1 through 9.0 and Pica8 PICOS 4.3.3.2 allow a remote attacker to cause a denial of service via a crafted BGP update with a corrupted attribute 23 (Tunnel Encapsulation).

A flaw was found in the github.com/containers/image library. This flaw allows attackers to trigger unexpected authenticated registry accesses on behalf of a victim user, causing resource exhaustion, local path traversal, and other attacks.

An issue was discovered on D-Link DSR-250 3.17 devices. Insufficient validation of configuration file checksums could allow a remote, authenticated attacker to inject arbitrary crontab entries into saved configurations before uploading. These entries are executed as root.

A flaw was found in the Linux SCTP stack. A blind attacker may be able to kill an existing SCTP association through invalid chunks if the attacker knows the IP-addresses and port numbers being used and the attacker can send packets with spoofed IP addresses.

An issue was discovered in the NAB Transact extension 2.1.0 for the WooCommerce plugin for WordPress. An online payment system bypass allows orders to be marked as fully paid by assigning an arbitrary bank transaction ID during the payment-details entry step.

Open Shortest Path First (OSPF) protocol implementations may improperly determine Link State Advertisement (LSA) recency for LSAs with MaxSequenceNumber. According to RFC 2328 section 13.1, for two instances of the same LSA, recency is determined by first comparing sequence numbers, then checksums, and finally MaxAge. In a case where the sequence numbers are the same, the LSA with the larger checksum is considered more recent, and will not be flushed from the Link State Database (LSDB). Since the RFC does not explicitly state that the values of links carried by a LSA must be the same when prematurely aging a self-originating LSA with MaxSequenceNumber, it is possible in vulnerable OSPF implementations for an attacker to craft a LSA with MaxSequenceNumber and invalid links that will result in a larger checksum and thus a 'newer' LSA that will not be flushed from the LSDB. Propagation of the crafted LSA can result in the erasure or alteration of the routing tables of routers within the routing domain, creating a denial of service condition or the re-routing of traffic on the network. CVE-2017-3224 has been reserved for Quagga and downstream implementations (SUSE, openSUSE, and Red Hat packages).

rsync 3.1.3-development before 2017-10-24 mishandles archaic checksums, which makes it easier for remote attackers to bypass intended access restrictions. NOTE: the rsync development branch has significant use beyond the rsync developers, e.g., the code has been copied for use in various GitHub projects.

Moodle before 2.2.2 has an external enrolment plugin context check issue where capability checks are not thorough

An issue in AsyncSSH before 2.14.1 allows attackers to control the remote end of an SSH client session via packet injection/removal and shell emulation, aka a "Rogue Session Attack."

One Identity Cloud Access Manager before 8.1.4 Hotfix 1 allows OTP bypass via vectors involving a man in the middle, the One Identity Defender product, and replacing a failed SAML response with a successful SAML response.

tlslite-ng version 0.7.3 and earlier, since commit d7b288316bca7bcdd082e6ccff5491e241305233 contains a CWE-354: Improper Validation of Integrity Check Value vulnerability in TLS implementation, tlslite/utils/constanttime.py: ct_check_cbc_mac_and_pad(); line "end_pos = data_len - 1 - mac.digest_size" that can result in an attacker manipulating the TLS ciphertext which will not be detected by receiving tlslite-ng. This attack appears to be exploitable via man in the middle on a network connection. This vulnerability appears to have been fixed after commit 3674815d1b0f7484454995e2737a352e0a6a93d8.

Insufficient checks in the finite state machine of the ShapeShift KeepKey hardware wallet before firmware 6.2.2 allow a partial reset of cryptographic secrets to known values via crafted messages. Notably, this breaks the security of U2F for new server registrations and invalidates existing registrations. This vulnerability can be exploited by unauthenticated attackers and the interface is reachable via WebUSB.

The Lenovo Service Framework Android application uses a set of nonsecure credentials when performing integrity verification of downloaded applications and/or data. This exposes the application to man-in-the-middle attacks leading to possible remote code execution.

Prior to 0.11.0-beta, LND (Lightning Network Daemon) had a vulnerability in its invoice database. While claiming on-chain a received HTLC output, it didn't verify that the corresponding outgoing off-chain HTLC was already settled before releasing the preimage. In the case of a hash-and-amount collision with an invoice, the preimage for an expected payment was instead released. A malicious peer could have deliberately intercepted an HTLC intended for the victim node, probed the preimage through a colluding relayed HTLC, and stolen the intercepted HTLC. The impact is a loss of funds in certain situations, and a weakening of the victim's receiver privacy.

It was found in Moodle before version 3.10.1, 3.9.4 and 3.8.7 that a insufficient capability checks in some grade related web services meant students were able to view other students grades.

In JetBrains TeamCity before 2020.2.3, insufficient checks of the redirect_uri were made during GitHub SSO token exchange.

Prior to 0.10.0-beta, LND (Lightning Network Daemon) would have accepted a counterparty high-S signature and broadcast tx-relay invalid local commitment/HTLC transactions. This can be exploited by any peer with an open channel regardless of the victim situation (e.g., routing node, payment-receiver, or payment-sender). The impact is a loss of funds in certain situations.

In OpenStack Ironic before 21.4.4, 22.x and 23.x before 23.0.3, 23.x and 24.x before 24.1.3, and 25.x and 26.x before 26.1.0, there is a lack of checksum validation of supplied image_source URLs when configured to convert images to a raw format for streaming.

Improper validation of integrity check value vulnerability in NEC Aterm WF1200CR firmware Ver1.3.2 and earlier, Aterm WG1200CR firmware Ver1.3.3 and earlier, and Aterm WG2600HS firmware Ver1.5.1 and earlier allows an attacker with an administrative privilege to execute arbitrary OS commands by sending a specially crafted request to a specific URL.

Nimbus JOSE+JWT before 4.39 proceeds improperly after detection of an invalid HMAC in authenticated AES-CBC decryption, which allows attackers to conduct a padding oracle attack.

Sylabs Singularity 3.0 through 3.5 lacks support for an Integrity Check. Singularity's sign and verify commands do not sign metadata found in the global header or data object descriptors of a SIF file.

An issue in AsyncSSH before 2.14.1 allows attackers to control the extension info message (RFC 8308) via a man-in-the-middle attack, aka a "Rogue Extension Negotiation."

A vulnerability has been identified in SCALANCE XM408-4C (All versions < V6.5), SCALANCE XM408-4C (L3 int.) (All versions < V6.5), SCALANCE XM408-8C (All versions < V6.5), SCALANCE XM408-8C (L3 int.) (All versions < V6.5), SCALANCE XM416-4C (All versions < V6.5), SCALANCE XM416-4C (L3 int.) (All versions < V6.5), SCALANCE XR524-8C, 1x230V (All versions < V6.5), SCALANCE XR524-8C, 1x230V (L3 int.) (All versions < V6.5), SCALANCE XR524-8C, 24V (All versions < V6.5), SCALANCE XR524-8C, 24V (L3 int.) (All versions < V6.5), SCALANCE XR524-8C, 2x230V (All versions < V6.5), SCALANCE XR524-8C, 2x230V (L3 int.) (All versions < V6.5), SCALANCE XR526-8C, 1x230V (All versions < V6.5), SCALANCE XR526-8C, 1x230V (L3 int.) (All versions < V6.5), SCALANCE XR526-8C, 24V (All versions < V6.5), SCALANCE XR526-8C, 24V (L3 int.) (All versions < V6.5), SCALANCE XR526-8C, 2x230V (All versions < V6.5), SCALANCE XR526-8C, 2x230V (L3 int.) (All versions < V6.5), SCALANCE XR528-6M (All versions < V6.5), SCALANCE XR528-6M (2HR2) (All versions < V6.5), SCALANCE XR528-6M (2HR2, L3 int.) (All versions < V6.5), SCALANCE XR528-6M (L3 int.) (All versions < V6.5), SCALANCE XR552-12M (All versions < V6.5), SCALANCE XR552-12M (2HR2) (All versions < V6.5), SCALANCE XR552-12M (2HR2) (All versions < V6.5), SCALANCE XR552-12M (2HR2, L3 int.) (All versions < V6.5). The OSPF protocol implementation in affected devices fails to verify the checksum and length fields in the OSPF LS Update messages. An unauthenticated remote attacker could exploit this vulnerability to cause interruptions in the network by sending specially crafted OSPF packets. Successful exploitation requires OSPF to be enabled on an affected device.

Like many other SSH implementations, Apache MINA SSHD suffered from the issue that is more widely known as CVE-2023-48795. An attacker that can intercept traffic between client and server could drop certain packets from the stream, potentially causing client and server to consequently end up with a connection for which some security features have been downgraded or disabled, aka a Terrapin attack The mitigations to prevent this type of attack were implemented in Apache MINA SSHD 2.12.0, both client and server side. Users are recommended to upgrade to at least this version. Note that both the client and the server implementation must have mitigations applied against this issue, otherwise the connection may still be affected.

Telerik Fiddler v5.0.20182.28034 doesn't verify the hash of EnableLoopback.exe before running it, which could lead to code execution or local privilege escalation by replacing the original EnableLoopback.exe.

On various RAD-ISM-900-EN-* devices by PHOENIX CONTACT an admin user could use the configuration file uploader in the WebUI to execute arbitrary code with root privileges on the OS due to an improper validation of an integrity check value in all versions of the firmware.

An issue was discovered in Listary through 6. Improper implementation of the update process leads to the download of software updates with a /check-update HTTP-based connection. This can be exploited with MITM techniques. Together with the lack of package validation, it can lead to manipulation of update packages that can cause an installation of malicious content.

Issue summary: The AES-SIV cipher implementation contains a bug that causes it to ignore empty associated data entries which are unauthenticated as a consequence. Impact summary: Applications that use the AES-SIV algorithm and want to authenticate empty data entries as associated data can be misled by removing, adding or reordering such empty entries as these are ignored by the OpenSSL implementation. We are currently unaware of any such applications. The AES-SIV algorithm allows for authentication of multiple associated data entries along with the encryption. To authenticate empty data the application has to call EVP_EncryptUpdate() (or EVP_CipherUpdate()) with NULL pointer as the output buffer and 0 as the input buffer length. The AES-SIV implementation in OpenSSL just returns success for such a call instead of performing the associated data authentication operation. The empty data thus will not be authenticated. As this issue does not affect non-empty associated data authentication and we expect it to be rare for an application to use empty associated data entries this is qualified as Low severity issue.

go-tuf is a Go implementation of The Update Framework (TUF). go-tuf does not correctly implement the client workflow for updating the metadata files for roles other than the root role. Specifically, checks for rollback attacks are not implemented correctly meaning an attacker can cause clients to install software that is older than the software which the client previously knew to be available, and may include software with known vulnerabilities. In more detail, the client code of go-tuf has several issues in regards to preventing rollback attacks: 1. It does not take into account the content of any previously trusted metadata, if available, before proceeding with updating roles other than the root role (i.e., steps 5.4.3.1 and 5.5.5 of the detailed client workflow). This means that any form of version verification done on the newly-downloaded metadata is made using the default value of zero, which always passes. 2. For both timestamp and snapshot roles, go-tuf saves these metadata files as trusted before verifying if the version of the metafiles they refer to is correct (i.e., steps 5.5.4 and 5.6.4 of the detailed client workflow). A fix is available in version 0.3.0 or newer. No workarounds are known for this issue apart from upgrading.

Sylabs Singularity 3.0 through 3.5 has Improper Validation of an Integrity Check Value. Image integrity is not validated when an ECL policy is enforced. The fingerprint required by the ECL is compared against the signature object descriptor(s) in the SIF file, rather than to a cryptographically validated signature.

The Libreswan Project has found a vulnerability in the processing of IKEv1 informational exchange packets which are encrypted and integrity protected using the established IKE SA encryption and integrity keys, but as a receiver, the integrity check value was not verified. This issue affects versions before 3.29.

In WIFI Firmware, there is a possible system crash due to a missing count check. This could lead to remote denial of service with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: ALPS06468894; Issue ID: ALPS06468894.

The fix for CVE-2022-3437 included changing memcmp to be constant time and a workaround for a compiler bug by adding "!= 0" comparisons to the result of memcmp. When these patches were backported to the heimdal-7.7.1 and heimdal-7.8.0 branches (and possibly other branches) a logic inversion sneaked in causing the validation of message integrity codes in gssapi/arcfour to be inverted.

An issue was discovered in osquery. A maliciously crafted Universal/fat binary can evade third-party code signing checks. By not completing full inspection of the Universal/fat binary, the user of the third-party tool will believe that the code is signed by Apple, but the malicious unsigned code will execute. This issue affects osquery prior to v3.2.7

The Microchip RN4870 module firmware 1.43 (and the Microchip PIC LightBlue Explorer Demo 4.2 DT100112) accepts PairCon_rmSend with incorrect values.

An issue was discovered in Cloud Foundry Foundation BOSH Release 261.x versions prior to 261.3 and all 260.x versions. In certain cases an authenticated Director user can provide a malicious checksum that could allow them to escalate their privileges on the Director VM, aka "BOSH Director Shell Injection Vulnerabilities."

Jenkins Pipeline: Groovy Plugin 3990.vd281dd77a_388 and earlier, except 3975.3977.v478dd9e956c3 does not check whether the main (Jenkinsfile) script for a rebuilt build is approved, allowing attackers with Item/Build permission to rebuild a previous build whose (Jenkinsfile) script is no longer approved.

FreshService Windows Agent < 2.11.0 and FreshService macOS Agent < 4.2.0 and FreshService Linux Agent < 3.3.0. are vulnerable to Broken integrity checking via the FreshAgent client and scheduled update service.

hslogin2.dll ActiveX Control in Groupware contains a vulnerability that could allow remote files to be downloaded and executed by setting the arguments to the activex method. This is due to a lack of integrity verification of the policy files referenced in the update process, and a remote attacker could induce a user to crafted web page, causing damage such as malicious code infection.

DigiExam up to v14.0.2 lacks integrity checks for native modules, allowing attackers to access PII and takeover accounts on shared computers.

Snap One OvrC Pro devices versions 7.2 and prior do not validate firmware updates correctly. The device only calculates the MD5 hash of the firmware and does not check using a private-public key mechanism. The lack of complete PKI system firmware signature could allow attackers to upload arbitrary firmware updates, resulting in code execution.

Missing integrity verification in the Triton inference handler in Amazon SageMaker Python SDK v2 before v2.257.2 and v3 before v3.8.0 might allow a remote authenticated actor to achieve code execution in inference containers via replacement of model artifacts in S3 with a specially crafted pickle payload that is deserialized without verification. This issue requires a remote authenticated actor with S3 write access to the model artifact path. To remediate this issue, we recommend upgrading to Amazon SageMaker Python SDK v2.257.2 or v3.8.0 and rebuild any Triton models previously created with ModelBuilder using the updated SDK.

A vulnerability classified as critical was found in Comodo Internet Security Premium 12.3.4.8162. This vulnerability affects unknown code of the file cis_update_x64.xml of the component Manifest File Handler. The manipulation leads to improper validation of integrity check value. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

secp256k1-node is a Node.js binding for an Optimized C library for EC operations on curve secp256k1. In `elliptic`-based version, `loadUncompressedPublicKey` has a check that the public key is on the curve. Prior to versions 5.0.1, 4.0.4, and 3.8.1, however, `loadCompressedPublicKey` is missing that check. That allows the attacker to use public keys on low-cardinality curves to extract enough information to fully restore the private key from as little as 11 ECDH sessions, and very cheaply on compute power. Other operations on public keys are also affected, including e.g. `publicKeyVerify()` incorrectly returning `true` on those invalid keys, and e.g. `publicKeyTweakMul()` also returning predictable outcomes allowing to restore the tweak. Versions 5.0.1, 4.0.4, and 3.8.1 contain a fix for the issue.

A missing integrity check in the update system in ProLion CryptoSpike 3.0.15P2 allows attackers to execute OS commands as the root Linux user on the host system via forged update packages.

Nextcloud calendar is a calendar app for the Nextcloud server platform. Due to missing precondition checks the server was trying to validate strings of any length as email addresses even when megabytes of data were provided, eventually making the server busy and unresponsive. It is recommended that the Nextcloud Calendar app is upgraded to 4.4.4. The only workaround for users unable to upgrade is to disable the calendar app.

The Zoom Client for Meetings for MacOS (Standard and for IT Admin) prior to version 5.9.6 failed to properly check the package version during the update process. This could lead to a malicious actor updating an unsuspecting user’s currently installed version to a less secure version.

Some Xiaomi models have a vulnerability in a certain application. The vulnerability is caused by the lack of checksum when using a three-party application to pass in parameters, and attackers can induce users to install a malicious app and use the vulnerability to achieve elevated privileges, making the normal services of the system affected.

SAP Business Client, versions 6.5, 7.0, does not perform necessary integrity checks which could be exploited by an attacker under certain conditions to modify the installer.

OpenZeppelin Contracts is a library for smart contract development. Starting in version 4.7.0 and prior to version 4.9.2, when the `verifyMultiProof`, `verifyMultiProofCalldata`, `procesprocessMultiProof`, or `processMultiProofCalldat` functions are in use, it is possible to construct merkle trees that allow forging a valid multiproof for an arbitrary set of leaves. A contract may be vulnerable if it uses multiproofs for verification and the merkle tree that is processed includes a node with value 0 at depth 1 (just under the root). This could happen inadvertedly for balanced trees with 3 leaves or less, if the leaves are not hashed. This could happen deliberately if a malicious tree builder includes such a node in the tree. A contract is not vulnerable if it uses single-leaf proving (`verify`, `verifyCalldata`, `processProof`, or `processProofCalldata`), or if it uses multiproofs with a known tree that has hashed leaves. Standard merkle trees produced or validated with the @openzeppelin/merkle-tree library are safe. The problem has been patched in version 4.9.2. Some workarounds are available. For those using multiproofs: When constructing merkle trees hash the leaves and do not insert empty nodes in your trees. Using the @openzeppelin/merkle-tree package eliminates this issue. Do not accept user-provided merkle roots without reconstructing at least the first level of the tree. Verify the merkle tree structure by reconstructing it from the leaves.

On all versions of 16.1.x, 15.1.x, 14.1.x, 13.1.x, 12.1.x, and 11.6.x of F5 BIG-IP Advanced WAF, ASM, and ASM, and F5 BIG-IP Guided Configuration (GC) all versions prior to 9.0, when running in Appliance mode, an authenticated attacker with Administrator role privilege may be able to bypass Appliance mode restrictions due to a missing integrity check in F5 BIG-IP Guided Configuration. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated

Improper validation of integrity check value vulnerability in Aterm SA3500G firmware versions prior to Ver. 3.5.9 allows an attacker with an administrative privilege to execute a malicious program.

In LiteSpeed QUIC (LSQUIC) Library before 4.0.4, DCID validation is mishandled.

An issue was discovered in systemd 253. An attacker can modify the contents of past events in a sealed log file and then adjust the file such that checking the integrity shows no error, despite modifications. NOTE: the vendor reportedly sent "a reply denying that any of the finding was a security vulnerability."

A vulnerability was found in ICEPAY REST-API-NET 0.9. It has been declared as problematic. Affected by this vulnerability is the function RestClient of the file Classes/RestClient.cs of the component Checksum Validation. The manipulation leads to improper validation of integrity check value. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. Upgrading to version 1.0 is able to address this issue. The patch is named 61f6b8758e5c971abff5f901cfa9f231052b775f. It is recommended to upgrade the affected component. The associated identifier of this vulnerability is VDB-222847.

Honeywell Experion PKS Safety Manager 5.02 has Insufficient Verification of Data Authenticity. According to FSCT-2022-0054, there is a Honeywell Experion PKS Safety Manager unauthenticated firmware update issue. The affected components are characterized as: Firmware update functionality. The potential impact is: Firmware manipulation. The Honeywell Experion PKS Safety Manager utilizes the DCOM-232/485 communication FTA serial interface and Enea POLO bootloader for firmware management purposes. An engineering workstation running the Safety Builder software communicates via serial or serial-over-ethernet link with the DCOM-232/485 interface. Firmware images were found to have no authentication (in the form of firmware signing) and only relied on insecure checksums for regular integrity checks. Firmware images are unsigned. An attacker with access to the serial interface (either through physical access, a compromised EWS or an exposed serial-to-ethernet gateway) can utilize hardcoded credentials (see FSCT-2022-0052) for the POLO bootloader to control the boot process and push malicious firmware images to the controller allowing for firmware manipulation, remote code execution and denial of service impacts. A mitigating factor is that in order for a firmware update to be initiated, the Safety Manager has to be rebooted which is typically done by means of physical controls on the Safety Manager itself. As such, an attacker would have to either lay dormant until a legitimate reboot occurs or possibly attempt to force a reboot through a secondary vulnerability.

An issue was discovered in systemd 253. An attacker can modify a sealed log file such that, in some views, not all existing and sealed log messages are displayed. NOTE: the vendor reportedly sent "a reply denying that any of the finding was a security vulnerability."

OpenZeppelin Contracts is a library for secure smart contract development. The functions `ECDSA.recover` and `ECDSA.tryRecover` are vulnerable to a kind of signature malleability due to accepting EIP-2098 compact signatures in addition to the traditional 65 byte signature format. This is only an issue for the functions that take a single `bytes` argument, and not the functions that take `r, v, s` or `r, vs` as separate arguments. The potentially affected contracts are those that implement signature reuse or replay protection by marking the signature itself as used rather than the signed message or a nonce included in it. A user may take a signature that has already been submitted, submit it again in a different form, and bypass this protection. The issue has been patched in 4.7.3.

There is an Improper Validation of Integrity Check Value Vulnerability in Huawei Smartphone.Successful exploitation of this vulnerability may cause the system to reset.

Nginx UI is a web user interface for the Nginx web server. Prior to version 2.3.4, the nginx-ui backup restore mechanism allows attackers to tamper with encrypted backup archives and inject malicious configuration during restoration. This issue has been patched in version 2.3.4.

An issue was discovered in systemd 253. An attacker can truncate a sealed log file and then resume log sealing such that checking the integrity shows no error, despite modifications. NOTE: the vendor reportedly sent "a reply denying that any of the finding was a security vulnerability."

Briar before 1.4.22 allows attackers to spoof other users' messages in a blog, forum, or private group, but each spoofed message would need to be an exact duplicate of a legitimate message displayed alongside the spoofed one.

The update functionality of the Discover Media infotainment system in Volkswagen Polo 2019 vehicles allows physically proximate attackers to execute arbitrary code because some unsigned parts of a metainfo file are parsed, which can cause attacker-controlled files to be written to the infotainment system and executed as root.

The Hoppscotch Browser Extension is a browser extension for Hoppscotch, a community-driven end-to-end open-source API development ecosystem. Due to an oversight during a change made to the extension in the commit d4e8e4830326f46ba17acd1307977ecd32a85b58, a critical check for the origin list was missed and allowed for messages to be sent to the extension which the extension gladly processed and responded back with the results of, while this wasn't supposed to happen and be blocked by the origin not being present in the origin list. This vulnerability exposes Hoppscotch Extension users to sites which call into Hoppscotch Extension APIs internally. This fundamentally allows any site running on the browser with the extension installed to bypass CORS restrictions if the user is running extensions with the given version. This security hole was patched in the commit 7e364b928ab722dc682d0fcad713a96cc38477d6 which was released along with the extension version `0.35`. As a workaround, Chrome users can use the Extensions Settings to disable the extension access to only the origins that you want. Firefox doesn't have an alternative to upgrading to a fixed version.

Proofpoint Enterprise Protection (PPS/PoD) before 8.16.4 contains a vulnerability that could allow an attacker to deliver an email message with a malicious attachment that bypasses scanning and file-blocking rules. The vulnerability exists because messages with certain crafted and malformed multipart structures are not properly handled.

A vulnerability was found in the Linux kernel's block_invalidatepage in fs/buffer.c in the filesystem. A missing sanity check may allow a local attacker with user privilege to cause a denial of service (DOS) problem.

An exploitable firmware modification vulnerability was discovered on the Netgear WPN824EXT WiFi Range Extender. An attacker can conduct a MITM attack to modify the user-uploaded firmware image and bypass the CRC check. A successful attack can either introduce a backdoor to the device or make the device DoS. This affects Firmware Version: 1.1.1_1.1.9.

Infotecs ViPNet Client and Coordinator before 4.3.2-42442 allow local users to gain privileges by placing a Trojan horse ViPNet update file in the update folder. The attack succeeds because of incorrect folder permissions in conjunction with a lack of integrity and authenticity checks.

inSync Client installer for macOS versions v6.8.0 and prior could allow an attacker to gain privileges of a root user from a lower privileged user due to improper integrity checks and directory permissions.

An Improper Validation of Integrity Check Value issue was discovered in PHOENIX CONTACT mGuard firmware versions 7.2 to 8.6.0. mGuard devices rely on internal checksums for verification of the internal integrity of the update packages. Verification may not always be performed correctly, allowing an attacker to modify firmware update packages.

Diebold Nixdorf Vynamic Security Suite (VSS) before 3.3.0 SR16, 4.0.0 SR06, 4.1.0 SR04, 4.2.0 SR03, and 4.3.0 SR01 fails to validate symlinks during the Pre-Boot Authorization (PBA) process. This can be exploited by a physical attacker who is able to manipulate the contents of the system's hard disk.

The DFX module has a vulnerability of improper validation of integrity check values.Successful exploitation of this vulnerability may affect system stability.

An issue was discovered on Samsung mobile devices with N(7.x) software. An attacker can boot a device with root privileges because the bootloader for the Qualcomm MSM8998 chipset lacks an integrity check of the system image, aka the "SamFAIL" issue. The Samsung ID is SVE-2017-10465 (November 2017).

A new feature to prevent Firmware downgrades was recently added to some Lexmark products. A method to override this downgrade protection has been identified.

A vulnerability in the Connectivity Fault Management (CFM) feature of Cisco IOS XR Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to incorrect processing of invalid continuity check messages (CCMs). An attacker could exploit this vulnerability by sending crafted CCMs to an affected device. A successful exploit could allow the attacker to cause the CFM service to crash when a user displays information about maintenance end points (MEPs) for peer MEPs on an affected device.

Missing Support for an Integrity Check in Shenzen Tenda Technology IP Camera CP3 V11.10.00.2211041355 allows attackers to update the device with crafted firmware

The use of the cyclic redundancy check (CRC) algorithm for integrity check during firmware update makes TRENDnet TV-IP651WI Network Camera firmware version v1.07.01 and earlier vulnerable to firmware modification attacks. An attacker can conduct a man-in-the-middle (MITM) attack to modify the new firmware image and bypass the checksum verification.

The use of the cyclic redundancy check (CRC) algorithm for integrity check during firmware update makes Ubiquiti airFiber AF2X Radio firmware version 3.2.2 and earlier vulnerable to firmware modification attacks. An attacker can conduct a man-in-the-middle (MITM) attack to modify the new firmware image and bypass the checksum verification.

An issue was discovered in Qualys Cloud Agent 4.8.0-49. It executes programs at various full pathnames without first making ownership and permission checks (e.g., to help ensure that a program was installed by root) and without integrity checks (e.g., a checksum comparison against known legitimate programs). Also, the vendor recommendation is to install this agent software with root privileges. Thus, privilege escalation is possible on systems where any of these pathnames is controlled by a non-root user. An example is /opt/firebird/bin/isql, where the /opt/firebird directory is often owned by the firebird user.

Diebold Nixdorf Vynamic Security Suite (VSS) before 3.3.0 SR10 fails to validate /etc/mtab during the Pre-Boot Authorization (PBA) process. This can be exploited by a physical attacker who is able to manipulate the contents of the system's hard disk.

All firmware versions of the NPort 5000 Series are affected by an improper validation of integrity check vulnerability. This vulnerability results from insufficient checks on firmware updates or upgrades, potentially allowing malicious users to manipulate the firmware and gain control of devices.

USG9500 with versions of V500R001C30;V500R001C60 have a missing integrity checking vulnerability. The software of the affected products does not check the integrity which may allow an attacker with high privilege to make malicious modifications without detection.

The default BKS keystore use an HMAC that is only 16 bits long, which can allow an attacker to compromise the integrity of a BKS keystore. Bouncy Castle release 1.47 changes the BKS format to a format which uses a 160 bit HMAC instead. This applies to any BKS keystore generated prior to BC 1.47. For situations where people need to create the files for legacy reasons a specific keystore type "BKS-V1" was introduced in 1.49. It should be noted that the use of "BKS-V1" is discouraged by the library authors and should only be used where it is otherwise safe to do so, as in where the use of a 16 bit checksum for the file integrity check is not going to cause a security issue in itself.

Improper Input Validation vulnerability in the upload functionality for user avatars allows functionality misuse due to missing check of filetypes. This issue affects OTRS: from 7.0.X through 7.0.48, from 8.0.X through 8.0.37, from 2023 through 2023.1.1.

A vulnerability has been identified in LOGO! 8 BM (incl. SIPLUS variants) (All versions < V8.3). Affected devices load firmware updates without checking the authenticity. Furthermore the integrity of the unencrypted firmware is only verified by a non-cryptographic method. This could allow an attacker to manipulate a firmware update and flash it to the device.

The vulnerability allows a successful attacker to bypass the integrity check of FW uploaded to the free@home System Access Point.

An exploitable firmware downgrade vulnerability was discovered on the Netgear WPN824EXT WiFi Range Extender. An attacker can conduct a MITM attack to replace the user-uploaded firmware image with an original old firmware image. This affects Firmware 1.1.1_1.1.9 and earlier.

An issue was discovered on Samsung mobile devices with M(6.0) and N(7.0) (Exynos5433, Exynos7420, or Exynos7870 chipsets) software. An attacker can bypass a ko (aka Kernel Module) signature by modifying the count of kernel modules. The Samsung ID is SVE-2016-7466 (January 2017).

jwe is a Ruby implementation of the RFC 7516 JSON Web Encryption (JWE) standard. In versions 1.1.0 and below, authentication tags of encrypted JWEs can be brute forced, which may result in loss of confidentiality for those JWEs and provide ways to craft arbitrary JWEs. This puts users at risk because JWEs can be modified to decrypt to an arbitrary value, decrypted by observing parsing differences and the GCM internal GHASH key can be recovered. Users are affected by this vulnerability even if they do not use an AES-GCM encryption algorithm for their JWEs. As the GHASH key may have been leaked, users must rotate the encryption keys after upgrading. This issue is fixed in version 1.1.1.

An Improper Validation of Integrity Check Value in Zscaler Client Connector on Windows allows an authenticated user to disable ZIA/ZPA by interrupting the service restart from Zscaler Diagnostics. This issue affects Client Connector: before 4.2.0.149.

The Firefox installer allows Firefox to be installed to a custom user writable location, leaving it unprotected from manipulation by unprivileged users or malware. If the Mozilla Maintenance Service is manipulated to update this unprotected location and the updated maintenance service in the unprotected location has been altered, the altered maintenance service can run with elevated privileges during the update process due to a lack of integrity checks. This allows for privilege escalation if the executable has been replaced locally. <br>*Note: This attack requires local system access and only affects Windows. Other operating systems are not affected.*. This vulnerability affects Firefox < 69, Firefox ESR < 60.9, and Firefox ESR < 68.1.

Issue Summary: Cryptographic Message Services (CMS) processing fails to perform sufficient input validation on the cipher and tag length fields of AuthEnvelopedData containers, leading to various potential compromises. Impact Summary: Attackers making use of these vulnerabilities may achieve key-equivalent functionality for a given CMS recipient and/or bypass integrity validation for a given message. In one use case, an attacker may send a CMS message containing AuthEnvelopedData with the cipher specified as a non-AEAD cipher. OpenSSL erroneously allows this selection, and attempts to decrypt and validate the message. An on-path attacker who captures one legitimate AES-GCM AuthEnvelopedData addressed to the victim can re-emit it with the recipientInfos set left byte-for-byte intact, so the victim's private key still unwraps the genuine CEK (the content-encryption key), but with the inner OID rewritten to AES-256-OFB (Output Feedback Mode, an unauthenticated keystream mode) and with an attacker-chosen IV and ciphertext. The victim initializes AES-256-OFB under the real CEK, never consults the MAC field, and CMS_decrypt() returns success. If the application under attack responds to the attacker with any indicator showing success or failure of the decryption effort, it is possible for the attacker to use this as an oracle to obtain key equivalent functionality for the CEK used for the chosen recipient of the message. In another use case, an attacker can reduce the tag length of the chosen AEAD cipher for a given AuthEnvelopedData container to be a single byte long, allowing an attacker to brute force CMS decryption, producing an integrity bypass for applications that trust CMS_decrypt() to reject modified content. The FIPS modules are not affected by this issue.

In the Linux kernel, the following vulnerability has been resolved: nfsd: map the EBADMSG to nfserr_io to avoid warning Ext4 will throw -EBADMSG through ext4_readdir when a checksum error occurs, resulting in the following WARNING. Fix it by mapping EBADMSG to nfserr_io. nfsd_buffered_readdir iterate_dir // -EBADMSG -74 ext4_readdir // .iterate_shared ext4_dx_readdir ext4_htree_fill_tree htree_dirblock_to_tree ext4_read_dirblock __ext4_read_dirblock ext4_dirblock_csum_verify warn_no_space_for_csum __warn_no_space_for_csum return ERR_PTR(-EFSBADCRC) // -EBADMSG -74 nfserrno // WARNING [ 161.115610] ------------[ cut here ]------------ [ 161.116465] nfsd: non-standard errno: -74 [ 161.117315] WARNING: CPU: 1 PID: 780 at fs/nfsd/nfsproc.c:878 nfserrno+0x9d/0xd0 [ 161.118596] Modules linked in: [ 161.119243] CPU: 1 PID: 780 Comm: nfsd Not tainted 5.10.0-00014-g79679361fd5d #138 [ 161.120684] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qe mu.org 04/01/2014 [ 161.123601] RIP: 0010:nfserrno+0x9d/0xd0 [ 161.124676] Code: 0f 87 da 30 dd 00 83 e3 01 b8 00 00 00 05 75 d7 44 89 ee 48 c7 c7 c0 57 24 98 89 44 24 04 c6 05 ce 2b 61 03 01 e8 99 20 d8 00 <0f> 0b 8b 44 24 04 eb b5 4c 89 e6 48 c7 c7 a0 6d a4 99 e8 cc 15 33 [ 161.127797] RSP: 0018:ffffc90000e2f9c0 EFLAGS: 00010286 [ 161.128794] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [ 161.130089] RDX: 1ffff1103ee16f6d RSI: 0000000000000008 RDI: fffff520001c5f2a [ 161.131379] RBP: 0000000000000022 R08: 0000000000000001 R09: ffff8881f70c1827 [ 161.132664] R10: ffffed103ee18304 R11: 0000000000000001 R12: 0000000000000021 [ 161.133949] R13: 00000000ffffffb6 R14: ffff8881317c0000 R15: ffffc90000e2fbd8 [ 161.135244] FS: 0000000000000000(0000) GS:ffff8881f7080000(0000) knlGS:0000000000000000 [ 161.136695] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 161.137761] CR2: 00007fcaad70b348 CR3: 0000000144256006 CR4: 0000000000770ee0 [ 161.139041] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 161.140291] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 161.141519] PKRU: 55555554 [ 161.142076] Call Trace: [ 161.142575] ? __warn+0x9b/0x140 [ 161.143229] ? nfserrno+0x9d/0xd0 [ 161.143872] ? report_bug+0x125/0x150 [ 161.144595] ? handle_bug+0x41/0x90 [ 161.145284] ? exc_invalid_op+0x14/0x70 [ 161.146009] ? asm_exc_invalid_op+0x12/0x20 [ 161.146816] ? nfserrno+0x9d/0xd0 [ 161.147487] nfsd_buffered_readdir+0x28b/0x2b0 [ 161.148333] ? nfsd4_encode_dirent_fattr+0x380/0x380 [ 161.149258] ? nfsd_buffered_filldir+0xf0/0xf0 [ 161.150093] ? wait_for_concurrent_writes+0x170/0x170 [ 161.151004] ? generic_file_llseek_size+0x48/0x160 [ 161.151895] nfsd_readdir+0x132/0x190 [ 161.152606] ? nfsd4_encode_dirent_fattr+0x380/0x380 [ 161.153516] ? nfsd_unlink+0x380/0x380 [ 161.154256] ? override_creds+0x45/0x60 [ 161.155006] nfsd4_encode_readdir+0x21a/0x3d0 [ 161.155850] ? nfsd4_encode_readlink+0x210/0x210 [ 161.156731] ? write_bytes_to_xdr_buf+0x97/0xe0 [ 161.157598] ? __write_bytes_to_xdr_buf+0xd0/0xd0 [ 161.158494] ? lock_downgrade+0x90/0x90 [ 161.159232] ? nfs4svc_decode_voidarg+0x10/0x10 [ 161.160092] nfsd4_encode_operation+0x15a/0x440 [ 161.160959] nfsd4_proc_compound+0x718/0xe90 [ 161.161818] nfsd_dispatch+0x18e/0x2c0 [ 161.162586] svc_process_common+0x786/0xc50 [ 161.163403] ? nfsd_svc+0x380/0x380 [ 161.164137] ? svc_printk+0x160/0x160 [ 161.164846] ? svc_xprt_do_enqueue.part.0+0x365/0x380 [ 161.165808] ? nfsd_svc+0x380/0x380 [ 161.166523] ? rcu_is_watching+0x23/0x40 [ 161.167309] svc_process+0x1a5/0x200 [ 161.168019] nfsd+0x1f5/0x380 [ 161.168663] ? nfsd_shutdown_threads+0x260/0x260 [ 161.169554] kthread+0x1c4/0x210 [ 161.170224] ? kthread_insert_work_sanity_check+0x80/0x80 [ 161.171246] ret_from_fork+0x1f/0x30

This vulnerability exists in the Apex Softcell LD Geo due to improper validation of the transaction token ID in the API endpoint. An authenticated remote attacker could exploit this vulnerability by manipulating the transaction token ID in the API request leading to unauthorized access and modification of transactions belonging to other users.

Lack of cryptographic integrity check on TETRA air-interface encrypted traffic. Since a stream cipher is employed, this allows an active adversary to manipulate cleartext data in a bit-by-bit fashion.

SzafirHost downloads necessary files in the context of the initiating web page. When called, SzafirHost updates its dynamic library. JAR files are correctly verified based on a list of trusted file hashes, and if a file was not on that list, it was checked to see if it had been digitally signed by the vendor. The application doesn't verify hash or vendor's digital signature of uploaded DLL, SO, JNILIB or DYLIB file. The attacker can provide malicious file which will be saved in users /temp folder and executed by the application. This issue was fixed in version 1.1.0.

The Contact Form 7 plugin for WordPress is vulnerable to Order Replay in all versions up to, and including, 6.0.5 via the 'wpcf7_stripe_skip_spam_check' function due to insufficient validation on a user controlled key. This makes it possible for unauthenticated attackers to reuse a single Stripe PaymentIntent for multiple transactions. Only the first transaction is processed via Stripe, but the plugin sends a successful email message for each transaction, which may trick an administrator into fulfilling each order.

This vulnerability exists in Reedos aiM-Star version 2.0.1 due to improper validation of the ‘mode’ parameter in the API endpoint used during the registration process. An authenticated remote attacker could exploit this vulnerability by manipulating parameter in the API request body on the vulnerable application. Successful exploitation of this vulnerability could allow the attacker to bypass certain constraints in the registration process leading to creation of multiple accounts.

Issue Summary: The PKCS#12 file processing fails to perform sufficient input validation for files that use Password-Based Message Authentication Code 1 (PBMAC1) integrity mechanism allowing a certificate and private key forgery. Impact Summary: An attacker impersonating a user can cause a service reading PKCS#12 files to accept forged certificates and private keys with a 1 in 256 probability. If a service accepting PKCS#12 files is using passwords for authenticating the received files, the attacker can create unencrypted PKCS#12 files that use PBMAC1 authentication that specifies an HMAC key of only one byte, allowing them to craft a file that will be accepted with a 1 in 256 probability. That would then cause the service to accept a certificate and private key controlled by the attacker. The FIPS modules are not affected by this issue, as the affected code is outside the OpenSSL FIPS module boundary.

SP1 is a zero‑knowledge virtual machine that proves the correct execution of programs compiled for the RISC-V architecture. In versions 6.0.0 through 6.0.2, a soundness vulnerability in the SP1 V6 recursive shard verifier allows a malicious prover to construct a recursive proof from a shard proof that the native verifier would reject. Version 6.1.0 fixes the issue.

Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to version 1.6.9, a library-level vulnerability was identified in the Authlib Python library concerning the validation of OpenID Connect (OIDC) ID Tokens. Specifically, the internal hash verification logic (_verify_hash) responsible for validating the at_hash (Access Token Hash) and c_hash (Authorization Code Hash) claims exhibits a fail-open behavior when encountering an unsupported or unknown cryptographic algorithm. This flaw allows an attacker to bypass mandatory integrity protections by supplying a forged ID Token with a deliberately unrecognized alg header parameter. The library intercepts the unsupported state and silently returns True (validation passed), inherently violating fundamental cryptographic design principles and direct OIDC specifications. This issue has been patched in version 1.6.9.

nimiq/core-rs-albatross is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Prior to version 1.2.2, a malicious or compromised validator that is elected as proposer can publish a macro block proposal where `header.body_root` does not match the actual macro body hash. The proposal can pass proposal verification because the macro proposal verification path validates the header but does not validate the binding `body_root == hash(body)`; later code expects this binding and may panic on mismatch, crashing validators. Note that the impact is only for validator nodes. The patch for this vulnerability is formally released as part of v1.2.2. The patch adds the corresponding body root verification in the proposal checks. No known workarounds are available.

A vulnerability exists in the IEC 61850 of the MicroSCADA X SYS600 product. An IEC 61850-8 crafted message content from IED or remote system can cause a denial of service resulting in disconnection loop.

An improper validation of integrity check value vulnerability [CWE-354] in FortiNDR version 7.4.2 and below, version 7.2.1 and below, version 7.1.1 and below, version 7.0.6 and below may allow an authenticated attacker with at least Read/Write permission on system maintenance to install a corrupted firmware image.

An issue was discovered on Microchip RN4870 1.43 devices. An attacker within BLE radio range can cause a denial of service by sending a pair confirm message with wrong values.