CWE-703

A heap overflow vulnerability in IPSec component of Ivanti Connect Secure (9.x, 22.x) and Ivanti Policy Secure allows an unauthenticated malicious user to send specially crafted requests in-order-to crash the service thereby causing a DoS attack. In certain conditions this may lead to execution of arbitrary code

An exploitable memory corruption vulnerability exists in the JavaScript engine of Foxit Software's Foxit PDF Reader, version 9.4.1.16828. A specially crafted PDF document can trigger an out-of-memory condition which isn't handled properly, resulting in arbitrary code execution. An attacker needs to trick the user to open the malicious file to trigger this vulnerability. If the browser plugin extension is enabled, visiting a malicious site can also trigger the vulnerability.

Asterisk is an open source private branch exchange and telephony toolkit. In Asterisk prior to versions 18.20.1, 20.5.1, and 21.0.1; as well as certified-asterisk prior to 18.9-cert6; Asterisk is susceptible to a DoS due to a race condition in the hello handshake phase of the DTLS protocol when handling DTLS-SRTP for media setup. This attack can be done continuously, thus denying new DTLS-SRTP encrypted calls during the attack. Abuse of this vulnerability may lead to a massive Denial of Service on vulnerable Asterisk servers for calls that rely on DTLS-SRTP. Commit d7d7764cb07c8a1872804321302ef93bf62cba05 contains a fix, which is part of versions 18.20.1, 20.5.1, 21.0.1, amd 18.9-cert6.

The Spam protection, Anti-Spam, FireWall by CleanTalk plugin for WordPress is vulnerable to unauthorized Arbitrary Plugin Installation due to an missing empty value check on the 'api_key' value in the 'perform' function in all versions up to, and including, 6.44. This makes it possible for unauthenticated attackers to install and activate arbitrary plugins which can be leveraged to achieve remote code execution if another vulnerable plugin is installed and activated.

A null pointer dereference vulnerability in IPSec component of Ivanti Connect Secure (9.x, 22.x) and Ivanti Policy Secure allows an unauthenticated malicious user to send specially crafted requests in-order-to crash the service thereby causing a DoS attack

A heap overflow vulnerability in IPSec component of Ivanti Connect Secure (9.x 22.x) and Ivanti Policy Secure allows an unauthenticated malicious user to send specially crafted requests in-order-to crash the service thereby causing a DoS attack or in certain conditions read contents from memory.

An XML entity expansion or XEE vulnerability in SAML component of Ivanti Connect Secure (9.x, 22.x) and Ivanti Policy Secure allows an unauthenticated attacker to send specially crafted XML requests in-order-to temporarily cause resource exhaustion thereby resulting in a limited-time DoS.

Http-proxy is a proxying library. Because of the way errors are handled in versions before 0.7.0, an attacker that forces an error can crash the server, causing a denial of service.

An Improper Check for Unusual or Exceptional Conditions vulnerability in the web component of Ivanti Connect Secure (9.x, 22.x) and Ivanti Policy Secure (9.x, 22.x) allows a remote unauthenticated attacker to send specially crafted requests in-order-to cause service disruptions.

When connecting to a certain port Axeda agent (All versions) and Axeda Desktop Server for Windows (All versions) when receiving certain input throws an exception. Services using said function do not handle the exception. Successful exploitation of this vulnerability could allow a remote unauthenticated attacker to crash the affected product.

FreeSWITCH is a Software Defined Telecom Stack enabling the digital transformation from proprietary telecom switches to a software implementation that runs on any commodity hardware. Prior to version 1.10.11, when handling DTLS-SRTP for media setup, FreeSWITCH is susceptible to Denial of Service due to a race condition in the hello handshake phase of the DTLS protocol. This attack can be done continuously, thus denying new DTLS-SRTP encrypted calls during the attack. If an attacker manages to send a ClientHello DTLS message with an invalid CipherSuite (such as `TLS_NULL_WITH_NULL_NULL`) to the port on the FreeSWITCH server that is expecting packets from the caller, a DTLS error is generated. This results in the media session being torn down, which is followed by teardown at signaling (SIP) level too. Abuse of this vulnerability may lead to a massive Denial of Service on vulnerable FreeSWITCH servers for calls that rely on DTLS-SRTP. To address this vulnerability, upgrade FreeSWITCH to 1.10.11 which includes the security fix. The solution implemented is to drop all packets from addresses that have not been validated by an ICE check.

Improper check or handling of exceptional conditions vulnerability in Nako3edit, editor component of nadesiko3 (PC Version) v3.3.74 and earlier allows a remote attacker to inject an invalid value to decodeURIComponent of nako3edit, which may lead the server to crash.

When Eclipse Mosquitto version 1.0 to 1.5.5 (inclusive) is configured to use a password file for authentication, any malformed data in the password file will be treated as valid. This typically means that the malformed data becomes a username and no password. If this occurs, clients can circumvent authentication and get access to the broker by using the malformed username. In particular, a blank line will be treated as a valid empty username. Other security measures are unaffected. Users who have only used the mosquitto_passwd utility to create and modify their password files are unaffected by this vulnerability.

An issue in the AST parser (ast/compile.go) of Open Policy Agent v0.10.2 allows attackers to cause a Denial of Service (DoS) via a crafted input.

Platform mechanism AutoIP allows remote attackers to reboot the device via a crafted packet in SICK AG solutions Bulkscan LMS111, Bulkscan LMS511, CLV62x – CLV65x, ICR890-3, LMS10x, LMS11x, LMS15x, LMS12x, LMS13x, LMS14x, LMS5xx, LMS53x, MSC800, RFH.

The package node-lmdb before 0.9.7 are vulnerable to Denial of Service (DoS) when defining a non-invokable ToString value, which will cause a crash during type check.

On Juniper Networks Junos OS and Junos OS Evolved devices, the receipt of a specific BGP UPDATE packet causes an internal counter to be incremented incorrectly, which over time can lead to the routing protocols process (RPD) crash and restart. This issue affects both IBGP and EBGP multihop deployment in IPv4 or IPv6 network. This issue affects: Juniper Networks Junos OS: 17.2X75 versions prior to 17.2X75-D105.19; 17.3 versions prior to 17.3R3-S8; 17.4 versions prior to 17.4R2-S10, 17.4R3-S2; 18.1 versions prior to 18.1R3-S10; 18.2 versions prior to 18.2R2-S7, 18.2R3-S4; 18.2X75 versions prior to 18.2X75-D13, 18.2X75-D411.1, 18.2X75-D420.18, 18.2X75-D52.3, 18.2X75-D60; 18.3 versions prior to 18.3R2-S4, 18.3R3-S2; 18.4 versions prior to 18.4R1-S7, 18.4R2-S4, 18.4R3-S2; 19.1 versions prior to 19.1R1-S5, 19.1R2-S1, 19.1R3; 19.2 versions prior to 19.2R1-S5, 19.2R2; 19.3 versions prior to 19.3R2-S2, 19.3R3; 19.4 versions prior to 19.4R1-S2, 19.4R2. Juniper Networks Junos OS Evolved: any releases prior to 20.1R2-EVO. This issue does not affect Juniper Networks Junos OS releases prior to 17.3R1.

A vulnerability has been identified in SCALANCE SC-600 (V2.0), SCALANCE XB-200 (V4.1), SCALANCE XC-200 (V4.1), SCALANCE XF-200BA (V4.1), SCALANCE XP-200 (V4.1), SCALANCE XR-300WG (V4.1). An authenticated attacker with network access to to port 22/tcp of an affected device may cause a Denial-of-Service condition. The security vulnerability could be exploited by an authenticated attacker with network access to the affected device. No user interaction is required to exploit this vulnerability. The vulnerability impacts the availability of the affected device.

An improper check or handling of exceptional conditions vulnerability [CWE-703] in Fortinet FortiOS version 7.4.1 allows an unauthenticated attacker to provoke a denial of service on the administrative interface via crafted HTTP requests.

A local file deletion vulnerability in Palo Alto Networks PAN-OS software enables an authenticated administrator to delete files from the local file system with elevated privileges. These files can include logs and system components that impact the integrity and availability of PAN-OS software.

When an attacker sends a specific crafted Ethernet Operation, Administration, and Maintenance (Ethernet OAM) packet to a target device, it may improperly handle the incoming malformed data and fail to sanitize this incoming data resulting in an overflow condition. This overflow condition in Juniper Networks Junos OS allows an attacker to cause a Denial of Service (DoS) condition by coring the CFM daemon. Continued receipt of these packets may cause an extended Denial of Service condition. This issue affects: Juniper Networks Junos OS 12.3 versions prior to 12.3R12-S15; 12.3X48 versions prior to 12.3X48-D95 on SRX Series; 14.1X50 versions prior to 14.1X50-D145; 14.1X53 versions prior to 14.1X53-D47; 15.1 versions prior to 15.1R2; 15.1X49 versions prior to 15.1X49-D170 on SRX Series; 15.1X53 versions prior to 15.1X53-D67.

A vulnerability in the handling of exceptional conditions in Juniper Networks Junos OS Evolved (EVO) allows an attacker to send specially crafted packets to the device, causing the Advanced Forwarding Toolkit manager (evo-aftmand-bt or evo-aftmand-zx) process to crash and restart, impacting all traffic going through the FPC, resulting in a Denial of Service (DoS). Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. Following messages will be logged prior to the crash: Feb 2 10:14:39 fpc0 evo-aftmand-bt[16263]: [Error] Nexthop: Failed to get fwd nexthop for nexthop:32710470974358 label:1089551617 for session:18 probe:35 Feb 2 10:14:39 fpc0 evo-aftmand-bt[16263]: [Error] Nexthop: Failed to get fwd nexthop for nexthop:19241453497049 label:1089551617 for session:18 probe:37 Feb 2 10:14:39 fpc0 evo-aftmand-bt[16263]: [Error] Nexthop: Failed to get fwd nexthop for nexthop:19241453497049 label:1089551617 for session:18 probe:44 Feb 2 10:14:39 fpc0 evo-aftmand-bt[16263]: [Error] Nexthop: Failed to get fwd nexthop for nexthop:32710470974358 label:1089551617 for session:18 probe:47 Feb 2 10:14:39 fpc0 audit[16263]: ANOM_ABEND auid=4294967295 uid=0 gid=0 ses=4294967295 pid=16263 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=11 Feb 2 10:14:39 fpc0 kernel: audit: type=1701 audit(1612260879.272:17): auid=4294967295 uid=0 gid=0 ses=4294967295 pid=16263 comm="EvoAftManBt-mai" exe="/usr/sbin/evo-aftmand-bt" sig=1 This issue affects Juniper Networks Junos OS Evolved: All versions prior to 20.4R2-EVO; 21.1 versions prior to 21.1R2-EVO.

Vitess is a database clustering system for horizontal scaling of MySQL through generalized sharding. Prior to version 16.0.2, users can either intentionally or inadvertently create a shard containing `/` characters from VTAdmin such that from that point on, anyone who tries to create a new shard from VTAdmin will receive an error. Attempting to view the keyspace(s) will also no longer work. Creating a shard using `vtctldclient` does not have the same problem because the CLI validates the input correctly. Version 16.0.2, corresponding to version 0.16.2 of the `go` module, contains a patch for this issue. Some workarounds are available. Always use `vtctldclient` to create shards, instead of using VTAdmin; disable creating shards from VTAdmin using RBAC; and/or delete the topology record for the offending shard using the client for your topology server.

A vulnerability in the processing of traffic matching a firewall filter containing a syslog action in Juniper Networks Junos OS on MX Series with MPC10/MPC11 cards installed, PTX10003 and PTX10008 Series devices, will cause the line card to crash and restart, creating a Denial of Service (DoS). Continued receipt and processing of packets matching the firewall filter can create a sustained Denial of Service (DoS) condition. When traffic hits the firewall filter, configured on lo0 or any physical interface on the line card, containing a term with a syslog action (e.g. 'term <name> then syslog'), the affected line card will crash and restart, impacting traffic processing through the ports of the line card. This issue only affects MX Series routers with MPC10 or MPC11 line cards, and PTX10003 or PTX10008 Series packet transport routers. No other platforms or models of line cards are affected by this issue. Note: This issue has also been identified and described in technical service bulletin TSB17931 (login required). This issue affects: Juniper Networks Junos OS on MX Series: 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R3-S2; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R2-S2, 20.2R3; 20.3 versions prior to 20.3R3; 20.4 versions prior to 20.4R2. Juniper Networks Junos OS Evolved on PTX10003, PTX10008: All versions prior to 20.4R2-EVO. This issue does not affect Juniper Networks Junos OS versions prior to 19.3R1.

An unauthenticated attacker is able to send a special HTTP request, that causes a service to crash. In case of a standalone VRM or BVMS with VRM installation this crash also opens the possibility to send further unauthenticated commands to the service. On some products the interface is only local accessible lowering the CVSS base score. For a list of modified CVSS scores, please see the official Bosch Advisory Appendix chapter Modified CVSS Scores for CVE-2021-23859

This issue was addressed through improved state management. This issue is fixed in Safari 26.1, iOS 26.1 and iPadOS 26.1, macOS Tahoe 26.1, tvOS 26.1, visionOS 26.1, watchOS 26.1. Processing maliciously crafted web content may lead to an unexpected process crash.

Synapse is an open-source Matrix homeserver written and maintained by the Matrix.org Foundation. The Matrix specification specifies a list of [event authorization rules](https://spec.matrix.org/v1.2/rooms/v9/#authorization-rules) which must be checked when determining if an event should be accepted into a room. In versions of Synapse up to and including version 1.61.0, some of these rules are not correctly applied. An attacker could craft events which would be accepted by Synapse but not a spec-conformant server, potentially causing divergence in the room state between servers. Administrators of homeservers with federation enabled are advised to upgrade to version 1.62.0 or higher. Federation can be disabled by setting [`federation_domain_whitelist`](https://matrix-org.github.io/synapse/latest/usage/configuration/config_documentation.html#federation_domain_whitelist) to an empty list (`[]`) as a workaround.

An incorrect implementation handling file descriptor in dpu driver prior to SMR Mar-2021 Release 1 results in memory corruption leading to kernel panic.

A logic issue was addressed with improved checks. This issue is fixed in iOS 18.7.3 and iPadOS 18.7.3, iOS 26.2 and iPadOS 26.2, macOS Sequoia 15.7.4, macOS Sonoma 14.8.4, macOS Tahoe 26.2, visionOS 26.2, watchOS 26.2. A remote attacker may be able to cause a denial-of-service.

An improper boundary check in DSP driver prior to SMR Mar-2021 Release 1 allows out of bounds memory access.

S-Lang 2.3.2 was discovered to contain an arithmetic exception via the function tt_sprintf().

A logic issue was addressed with improved checks. This issue is fixed in Safari 18.6, macOS Sequoia 15.6. A download's origin may be incorrectly associated.

Incorrect download source UI in Downloads in Samsung Internet prior to 16.0.6.23 allows attackers to perform domain spoofing via a crafted HTML page.

Improper check vulnerability in Samsung Health prior to version 6.17 allows attacker to read internal cache data via exported component.

Vitess is a database clustering system for horizontal scaling of MySQL. Users can either intentionally or inadvertently create a keyspace containing `/` characters such that from that point on, anyone who tries to view keyspaces from VTAdmin will receive an error. Trying to list all the keyspaces using `vtctldclient GetKeyspaces` will also return an error. Note that all other keyspaces can still be administered using the CLI (vtctldclient). This issue is fixed in version 16.0.1. As a workaround, delete the offending keyspace using a CLI client (vtctldclient).

A vulnerability in the Simple Network Management Protocol (SNMP) feature of Cisco Adaptive Security Appliance (ASA) Software and Cisco Firepower Threat Defense (FTD) Software could allow an authenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability is due to insufficient input validation. An attacker could exploit this vulnerability by sending a crafted SNMP request to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.

Improper check or handling of exceptional conditions vulnerability affecting Vonets industrial wifi bridge relays and wifi bridge repeaters, software versions 3.3.23.6.9 and prior, enable an unauthenticated remote attacker to cause a denial of service. A specially-crafted HTTP request to pre-authentication resources can crash the service.

Non-compliance of recommended secure coding scheme in Samsung Internet prior to version 14.0.1.62 allows attackers to display fake URL in address bar via phising URL link.

An improper handling of a malformed API request to an API server in Bosch BT software products can allow an unauthenticated attacker to cause a Denial of Service (DoS) situation.

The Apollo Router is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation. Affected versions are subject to a Denial-of-Service (DoS) type vulnerability which causes the Router to panic and terminate when a multi-part response is sent. When users send queries to the router that uses the `@defer` or Subscriptions, the Router will panic. To be vulnerable, users of Router must have a coprocessor with `coprocessor.supergraph.response` configured in their `router.yaml` and also to support either `@defer` or Subscriptions. Apollo Router version 1.33.0 has a fix for this vulnerability which was introduced in PR #4014. Users are advised to upgrade. Users unable to upgrade should avoid using the coprocessor supergraph response or disable defer and subscriptions support and continue to use the coprocessor supergraph response.

In certain conditions for Calico Typha (v3.26.2, v3.25.1 and below), and Calico Enterprise Typha (v3.17.1, v3.16.3, v3.15.3 and below), a client TLS handshake can block the Calico Typha server indefinitely, resulting in denial of service. The TLS Handshake() call is performed inside the main server handle for loop without any timeout allowing an unclean TLS handshake to block the main loop indefinitely while other connections will be idle waiting for that handshake to finish.

Vyper is a Pythonic Smart Contract Language for the EVM. When the Vyper Compiler uses the precompiles EcRecover (0x1) and Identity (0x4), the success flag of the call is not checked. As a consequence an attacker can provide a specific amount of gas to make these calls fail but let the overall execution continue. Then the execution result can be incorrect. Based on EVM's rules, after the failed precompile the remaining code has only 1/64 of the pre-call-gas left (as 63/64 were forwarded and spent). Hence, only fairly simple executions can follow the failed precompile calls. Therefore, we found no significantly impacted real-world contracts. None the less an advisory has been made out of an abundance of caution. This issue is fixed in 0.4.1.

An Improper Check or Handling of Exceptional Conditions vulnerability in the IPsec library of Juniper Networks Junos OS allows a network-based, unauthenticated attacker to cause Denial of Service (DoS). On all MX platforms with MS-MPC or MS-MIC card, when specific IPv4 packets are processed by an IPsec6 tunnel, the Multiservices PIC Management Daemon (mspmand) process will core and restart. This will lead to FPC crash. Traffic flow is impacted while mspmand restarts. Continued receipt of these specific packets will cause a sustained Denial of Service (DoS) condition. This issue only occurs if an IPv4 address is not configured on the multiservice interface. This issue affects: Juniper Networks Junos OS on MX Series All versions prior to 19.4R3-S9; 20.1 version 20.1R3-S5 and later versions; 20.2 versions prior to 20.2R3-S5; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3-S3; 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R2-S1, 21.4R3; 22.1 versions prior to 22.1R2.

Authenticated administrators may override the system configuration file and cause a denial of service.

chetans9 core-php-admin-panel through commit a94a780d6 contains an authentication bypass vulnerability in includes/auth_validate.php. The application sends an HTTP redirect via header(Location:login.php) when a user is not authenticated but fails to call exit() afterward. This allows remote unauthenticated attackers to access protected pages.customer database.

An Improper Check or Handling of Exceptional Conditions within the storm control feature of Juniper Networks Junos OS allows an attacker sending a high rate of traffic to cause a Denial of Service. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. Storm control monitors the level of applicable incoming traffic and compares it with the level specified. If the combined level of the applicable traffic exceeds the specified level, the switch drops packets for the controlled traffic types. This issue affects Juniper Networks Junos OS on QFX10002: All versions prior to 19.3R3-S7; 19.4 versions prior to 19.4R3-S11; 20.2 versions prior to 20.2R3-S6; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R2.

Lack of proper validation in HCI Host stack initialization can cause a crash of the bluetooth stack

Netty is a network application framework for development of protocol servers and clients. In netty-codec-haproxy prior to versions 4.1.135.Final and 4.2.15.Final, when decoding a PP2_TYPE_SSL TLV, HAProxyMessage.readNextTLV() first calls `header.retainedSlice(header.readerIndex(), length)` and only then reads the 1-byte client field and 4-byte verify field. If the attacker sets the TLV length below 5, the subsequent readByte/readInt throws IndexOutOfBoundsException. HAProxyMessageDecoder only catches HAProxyProtocolException around this call, so the IOOBE propagates and the retained slice on the pooled cumulation buffer is never released. Versions 4.1.135.Final and 4.2.15.Final patch the issue.

Improper handling of exceptional conditions in Bixby prior to version 3.0.53.02 allows attacker to execute the actions registered by the user.

In kubelet v1.13.6 and v1.14.2, containers for pods that do not specify an explicit runAsUser attempt to run as uid 0 (root) on container restart, or if the image was previously pulled to the node. If the pod specified mustRunAsNonRoot: true, the kubelet will refuse to start the container as root. If the pod did not specify mustRunAsNonRoot: true, the kubelet will run the container as uid 0.

IBM Security Verify Access 10.0.0.0 through 10.0.7.1, under certain configurations, could allow an unauthenticated attacker to cause a denial of service due to asymmetric resource consumption. IBM X-Force ID: 287615.

The issue was addressed with improved checks. This issue is fixed in iOS 17.5 and iPadOS 17.5, macOS Sonoma 14.5, tvOS 17.5, visionOS 1.2, watchOS 10.5. An app may be able to elevate privileges.

If there was a PAC URL set and the server that hosts the PAC was not reachable, OCSP requests would have been blocked, resulting in incorrect error pages being shown. This vulnerability affects Firefox < 102, Firefox ESR < 91.11, Thunderbird < 102, and Thunderbird < 91.11.

When computing a shared secret or point multiplication on the NIST P-256 curve using a public key with an X coordinate of zero, an error is returned from the library, and an invalid unreduced value is written to the output buffer. This may be leveraged by an attacker to cause an error scenario, resulting in a limited denial of service for an individual user. The scope of impact cannot extend to other components.

When computing a shared secret or point multiplication on the NIST P-256 curve that results in an X coordinate of zero, the resulting output is not properly reduced modulo the P-256 field prime and is invalid. The resulting output may cause an error when used in other operations. This may be leveraged by an attacker to cause an error scenario or incorrect choice of session key in applications which use the library, resulting in a limited denial of service for an individual user. The scope of impact cannot extend to other components.

When compressing or decompressing a point on the NIST P-256 elliptic curve with an X coordinate of zero, the resulting output is not properly reduced modulo the P-256 field prime and is invalid. The resulting output will cause an error when used in other operations. This may be leveraged by an attacker to cause an error scenario in applications which use the library, resulting in a limited denial of service for an individual user. The scope of impact cannot extend to other components.

Rust EVM is an Ethereum Virtual Machine interpreter. In `rust-evm`, a feature called `record_external_operation` was introduced, allowing library users to record custom gas changes. This feature can have some bogus interactions with the call stack. In particular, during finalization of a `CREATE` or `CREATE2`, in the case that the substack execution happens successfully, `rust-evm` will first commit the substate, and then call `record_external_operation(Write(out_code.len()))`. If `record_external_operation` later fails, this error is returned to the parent call stack, instead of `Succeeded`. Yet, the substate commitment already happened. This causes smart contracts able to commit state changes, when the parent caller contract receives zero address (which usually indicates that the execution has failed). This issue only impacts library users with custom `record_external_operation` that returns errors. The issue is patched in release 0.41.1. No known workarounds are available.

AVEVA PI Server versions 2023 and 2018 SP3 P05 and prior contain a vulnerability that could allow an unauthenticated user to remotely crash the PI Message Subsystem of a PI Server, resulting in a denial-of-service condition.

An improper handling of a malformed API answer packets to API clients in Bosch BT software products can allow an unauthenticated attacker to cause a Denial of Service (DoS) situation. To exploit this vulnerability an attacker has to replace an existing API server e.g. through Man-in-the-Middle attacks.

Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. For versions 2.9.0-rc1 through 2.14.19, 3.0.0-rc1 through 3.2.0-rc1, 3.1.6 and 3.0.17, when the webhook.azuredevops.username and webhook.azuredevops.password are not set in the default configuration, the /api/webhook endpoint crashes the entire argocd-server process when it receives an Azure DevOps Push event whose JSON array resource.refUpdates is empty. The slice index [0] is accessed without a length check, causing an index-out-of-range panic. A single unauthenticated HTTP POST is enough to kill the process. This issue is resolved in versions 2.14.20, 3.2.0-rc2, 3.1.8 and 3.0.19.

Argo CD is a declarative, GitOps continuous delivery tool for Kubernetes. Versions 1.2.0 through 1.8.7, 2.0.0-rc1 through 2.14.19, 3.0.0-rc1 through 3.2.0-rc1, 3.1.7 and 3.0.18 are vulnerable to malicious API requests which can crash the API server and cause denial of service to legitimate clients. Without a configured webhook.bitbucketserver.secret, Argo CD's /api/webhook endpoint crashes when receiving a malformed Bitbucket Server payload (non-array repository.links.clone field). A single unauthenticated request triggers CrashLoopBackOff, and targeting all replicas causes complete API outage. This issue is fixed in versions 2.14.20, 3.2.0-rc2, 3.1.8 and 3.0.19.

This issue was addressed through improved state management. This issue is fixed in Safari 26.1, iOS 18.7.2 and iPadOS 18.7.2, iOS 26.1 and iPadOS 26.1, macOS Tahoe 26.1, tvOS 26.1, visionOS 26.1, watchOS 26.1. Processing maliciously crafted web content may lead to an unexpected process crash.

Omni manages Kubernetes on bare metal, virtual machines, or in a cloud. Prior to 1.1.5 and 1.0.2, there is a nil pointer dereference vulnerability in the Omni Resource Service allows unauthenticated users to cause a server panic and denial of service by sending empty create/update resource requests through the API endpoints. The vulnerability exists in the isSensitiveSpec function which calls grpcomni.CreateResource without checking if the resource's metadata field is nil. When a resource is created with an empty Metadata field, the CreateResource function attempts to access resource.Metadata.Version causing a segmentation fault. This vulnerability is fixed in 1.1.5 and 1.0.2.

An Improper Check or Handling of Exceptional Conditions vulnerability in the UTM (Unified Threat Management) Web-Filtering feature of Juniper Networks Junos OS on SRX Series causes a jbuf memory leak to occur when accessing certain websites, eventually leading to a Denial of Service (DoS) condition. Service restoration is only possible by rebooting the system. The jbuf memory leak only occurs in SSL Proxy and UTM Web-Filtering configurations. Other products, platforms, and configurations are not affected by this vulnerability. This issue affects Juniper Networks Junos OS on SRX Series: 22.2 versions prior to 22.2R3; 22.3 versions prior to 22.3R2-S1, 22.3R3; 22.4 versions prior to 22.4R1-S2, 22.4R2. This issue does not affect Juniper Networks Junos OS versions prior to 22.2R2.

A logic issue was addressed with improved checks. This issue is fixed in Safari 18.6, macOS Sequoia 15.6. Processing maliciously crafted web content may lead to an unexpected Safari crash.

All versions of the package node-twain are vulnerable to Improper Check or Handling of Exceptional Conditions due to the length of the source data not being checked. Creating a new twain.TwainSDK with a productName or productFamily, manufacturer, version.info property of length >= 34 chars leads to a buffer overflow vulnerability.

In an EVPN/VXLAN scenario, if an IRB interface with a virtual gateway address (VGA) is configured on a PE, a traffic loop may occur upon receipt of specific IP multicast traffic. The traffic loop will cause interface traffic to increase abnormally, ultimately leading to a Denial of Service (DoS) in packet processing. The following command could be used to monitor the interface traffic: user@junos> monitor interface traffic Interface Link Input packets (pps) Output packets (pps) et-0/0/1 Up 6492089274364 (70994959) 6492089235319 (70994956) et-0/0/25 Up 343458103 (1) 156844 (0) ae0 Up 9132519197257 (70994959) 9132519139454 (70994956) This issue affects Juniper Networks Junos OS on QFX Series: all versions prior to 17.3R3-S10; 17.4 versions prior to 17.4R2-S12, 17.4R3-S3; 18.1 versions prior to 18.1R3-S11; 18.2 versions prior to 18.2R3-S6; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R2-S5, 18.4R3-S5; 19.1 versions prior to 19.1R1-S6, 19.1R2-S2, 19.1R3-S3; 19.2 versions prior to 19.2R1-S5, 19.2R3-S1; 19.3 versions prior to 19.3R2-S5, 19.3R3; 19.4 versions prior to 19.4R2-S2, 19.4R3; 20.1 versions prior to 20.1R2; 20.2 versions prior to 20.2R1-S2, 20.2R2.

The AppPresser plugin for WordPress is vulnerable to improper missing encryption exception handling on the 'decrypt_value' and on the 'doCookieAuth' functions in all versions up to, and including, 4.3.2. This makes it possible for unauthenticated attackers to log in as any existing user on the site, such as an administrator, if they previously used the login via the plugin API. This can only be exploited if the 'openssl' php extension is not loaded on the server.

In BitmapExport.java, there is a possible failure to truncate images due to a logic error in the code.Product: AndroidVersions: Android kernelAndroid ID: A-264261868References: N/A

Improper check in Loader in Samsung Internet prior to 17.0.1.69 allows attackers to spoof address bar via executing script.

Vault and Vault Enterprise did not properly handle requests originating from unauthorized IP addresses when the TCP listener option, proxy_protocol_behavior, was set to deny_unauthorized. When receiving a request from a source IP address that was not listed in proxy_protocol_authorized_addrs, the Vault API server would shut down and no longer respond to any HTTP requests, potentially resulting in denial of service. While this bug also affected versions of Vault up to 1.17.1 and 1.16.5, a separate regression in those release series did not allow Vault operators to configure the deny_unauthorized option, thus not allowing the conditions for the denial of service to occur. Fixed in Vault and Vault Enterprise 1.17.2, 1.16.6, and 1.15.12.

Every uncached /avatar/:hash request spawns a goroutine that refreshes the Gravatar image. If the refresh sits in the 10-slot worker queue longer than three seconds, the handler times out and stops listening for the result, so that goroutine blocks forever trying to send on an unbuffered channel. Sustained traffic with random hashes keeps tripping this timeout, so goroutine count grows linearly, eventually exhausting memory and causing Grafana to crash on some systems.

This issue was addressed through improved state management. This issue is fixed in Safari 26.1, iOS 26.1 and iPadOS 26.1, macOS Tahoe 26.1, tvOS 26.1, visionOS 26.1. Processing maliciously crafted web content may lead to an unexpected process crash.

A malicious / defect bluetooth controller can cause a Denial of Service due to unchecked input in le_read_buffer_size_complete.

The DFX unwind stack module of the ArkCompiler has a vulnerability in interface calling.Successful exploitation of this vulnerability affects system services and device availability.

A vulnerability has been found in Dahua products.  After obtaining the administrator's username and password, the attacker can send a carefully crafted data packet to the interface with vulnerabilities, causing the device to crash.

Improper check of password character lenght in ORing IAP-420 allows a forced deadlock. This issue affects IAP-420: through 2.01e.

The SJA1000 CAN controller driver backend automatically attempt to recover from a bus-off event when built with CONFIG_CAN_AUTO_BUS_OFF_RECOVERY=y. This results in calling k_sleep() in IRQ context, causing a fatal exception.

Unitronics Vision PLC – CWE-703: Improper Check or Handling of Exceptional Conditions may allow denial of service

A structured exception handler overflow vulnerability in Leao Consultoria e Desenvolvimento de Sistemas (LCDS) LTDA ME LAquis SCADA 4.1.0.3391 and earlier may allow code execution.

BigBlueButton is an open-source virtual classroom. A Denial of Service (DoS) vulnerability in versions prior to 3.0.13 allows any authenticated user to freeze or crash the entire server by abusing the polling feature's `Choices` response type. By submitting a malicious payload with a massive array in the `answerIds` field, the attacker can cause the current meeting — and potentially all meetings on the server — to become unresponsive. Version 3.0.13 contains a patch. No known workarounds are available.

CometBFT is a distributed, Byzantine fault-tolerant, deterministic state machine replication engine. In the `blocksync` protocol peers send their `base` and `latest` heights when they connect to a new node (`A`), which is syncing to the tip of a network. `base` acts as a lower ground and informs `A` that the peer only has blocks starting from height `base`. `latest` height informs `A` about the latest block in a network. Normally, nodes would only report increasing heights. If `B` fails to provide the latest block, `B` is removed and the `latest` height (target height) is recalculated based on other nodes `latest` heights. The existing code however doesn't check for the case where `B` first reports `latest` height `X` and immediately after height `Y`, where `X > Y`. `A` will be trying to catch up to 2000 indefinitely. This condition requires the introduction of malicious code in the full node first reporting some non-existing `latest` height, then reporting lower `latest` height and nodes which are syncing using `blocksync` protocol. This issue has been patched in versions 1.0.1 and 0.38.17 and all users are advised to upgrade. Operators may attempt to ban malicious peers from the network as a workaround.

badmonkey, a Security Researcher has found a flaw that allows for a unauthenticated DoS attack on the camera. An attacker runs a crafted URL, nobody can access the web management page of the camera. and must manually restart the device or re-power it. The manufacturer has released patch firmware for the flaw, please refer to the manufacturer's report for details and workarounds.

The `rsa` crate is an RSA implementation written in rust. Prior to version 0.9.10, when creating a RSA private key from its components, the construction panics instead of returning an error when one of the primes is `1`. Version 0.9.10 fixes the issue.

A flaw was found in Nodemailer. This vulnerability allows a denial of service (DoS) via a crafted email address header that triggers infinite recursion in the address parser.

The XINJE XL5E-16T and XD5E-24R-E programmable logic controllers V3.5.3b-V3.7.2a have a vulnerability in handling Modbus messages. When a TCP connection is established with the above series of controllers within a local area network (LAN), sending a specific Modbus message to the controller can cause the PLC to crash, interrupting the normal operation of the programs running in the PLC. This results in the ERR indicator light turning on and the RUN indicator light turning off.

A vulnerability has been identified in SIMATIC Reader RF610R CMIIT (6GT2811-6BC10-2AA0) (All versions < V4.2), SIMATIC Reader RF610R ETSI (6GT2811-6BC10-0AA0) (All versions < V4.2), SIMATIC Reader RF610R FCC (6GT2811-6BC10-1AA0) (All versions < V4.2), SIMATIC Reader RF615R CMIIT (6GT2811-6CC10-2AA0) (All versions < V4.2), SIMATIC Reader RF615R ETSI (6GT2811-6CC10-0AA0) (All versions < V4.2), SIMATIC Reader RF615R FCC (6GT2811-6CC10-1AA0) (All versions < V4.2), SIMATIC Reader RF650R ARIB (6GT2811-6AB20-4AA0) (All versions < V4.2), SIMATIC Reader RF650R CMIIT (6GT2811-6AB20-2AA0) (All versions < V4.2), SIMATIC Reader RF650R ETSI (6GT2811-6AB20-0AA0) (All versions < V4.2), SIMATIC Reader RF650R FCC (6GT2811-6AB20-1AA0) (All versions < V4.2), SIMATIC Reader RF680R ARIB (6GT2811-6AA10-4AA0) (All versions < V4.2), SIMATIC Reader RF680R CMIIT (6GT2811-6AA10-2AA0) (All versions < V4.2), SIMATIC Reader RF680R ETSI (6GT2811-6AA10-0AA0) (All versions < V4.2), SIMATIC Reader RF680R FCC (6GT2811-6AA10-1AA0) (All versions < V4.2), SIMATIC Reader RF685R ARIB (6GT2811-6CA10-4AA0) (All versions < V4.2), SIMATIC Reader RF685R CMIIT (6GT2811-6CA10-2AA0) (All versions < V4.2), SIMATIC Reader RF685R ETSI (6GT2811-6CA10-0AA0) (All versions < V4.2), SIMATIC Reader RF685R FCC (6GT2811-6CA10-1AA0) (All versions < V4.2), SIMATIC RF1140R (6GT2831-6CB00) (All versions < V1.1), SIMATIC RF1170R (6GT2831-6BB00) (All versions < V1.1), SIMATIC RF166C (6GT2002-0EE20) (All versions < V2.2), SIMATIC RF185C (6GT2002-0JE10) (All versions < V2.2), SIMATIC RF186C (6GT2002-0JE20) (All versions < V2.2), SIMATIC RF186CI (6GT2002-0JE50) (All versions < V2.2), SIMATIC RF188C (6GT2002-0JE40) (All versions < V2.2), SIMATIC RF188CI (6GT2002-0JE60) (All versions < V2.2), SIMATIC RF360R (6GT2801-5BA30) (All versions < V2.2). The affected devices does not properly handle the error in case of exceeding characters while setting SNMP leading to the restart of the application.

A vulnerability has been identified in SCALANCE SC-600 (V2.0). An authenticated attacker with access to port 22/tcp as well as physical access to an affected device may trigger the device to allow execution of arbitrary commands. The security vulnerability could be exploited by an authenticated attacker with physical access to the affected device. No user interaction is required to exploit this vulnerability. The vulnerability impacts the confidentiality, integrity and availability of the affected device.

Incorrect boundary conditions in the JavaScript: WebAssembly component. This vulnerability was fixed in Firefox 145, Firefox ESR 140.5, Thunderbird 145, and Thunderbird 140.5.

On Juniper Networks Junos OS platforms configured as DHCPv6 local server or DHCPv6 Relay Agent, Juniper Networks Dynamic Host Configuration Protocol Daemon (JDHCPD) process might crash with a core dump if a specific DHCPv6 packet is received, resulting in a restart of the daemon. The daemon automatically restarts without intervention, but continued receipt and processing of these specific packets will repeatedly crash the JDHCPD process and sustain the Denial of Service (DoS) condition. This issue only affects DHCPv6. DHCPv4 is not affected by this issue. This issue affects: Juniper Networks Junos OS 17.3 versions prior to 17.3R3-S11; 17.4 versions prior to 17.4R3-S4; 18.1 versions prior to 18.1R3-S12; 18.2 versions prior to 18.2R3-S7; 18.3 versions prior to 18.3R3-S4; 18.4 versions prior to 18.4R3-S7; 19.1 versions prior to 19.1R3-S4; 19.2 versions prior to 19.2R3-S1; 19.3 versions prior to 19.3R3-S1, 19.3R3-S2; 19.4 versions prior to 19.4R3-S1; 20.1 versions prior to 20.1R2, 20.1R3; 20.2 versions prior to 20.2R2, 20.2R3; 20.3 versions prior to 20.3R1-S2, 20.3R2.

On Juniper Networks Junos OS platforms configured as DHCPv6 local server or DHCPv6 Relay Agent, the Juniper Networks Dynamic Host Configuration Protocol Daemon (JDHCPD) process might crash if a malformed DHCPv6 packet is received, resulting in a restart of the daemon. The daemon automatically restarts without intervention, but continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue only affects DHCPv6. DHCPv4 is not affected by this issue. This issue affects Juniper Networks Junos OS: 17.3 versions prior to 17.3R3-S12; 17.4 versions prior to 17.4R3-S5; 18.1 versions prior to 18.1R3-S13; 18.2 versions prior to 18.2R3-S8; 18.3 versions prior to 18.3R3-S5; 18.4 versions prior to 18.4R1-S8, 18.4R3-S7; 19.1 versions prior to 19.1R3-S5; 19.2 versions prior to 19.2R3-S2; 19.3 versions prior to 19.3R3-S2; 19.4 versions prior to 19.4R3-S2; 20.1 versions prior to 20.1R3; 20.2 versions prior to 20.2R2-S3, 20.2R3; 20.3 versions prior to 20.3R2; 20.4 versions prior to 20.4R2.

NVIDIA ConnectX-5, ConnectX-6, and ConnectX6-DX contain a vulnerability in the NIC firmware, where an unprivileged user can cause improper handling of exceptional conditions, which may lead to denial of service.

An improper check or handling of exceptional conditions in NPU driver prior to SMR Jan-2022 Release 1 allows arbitrary memory write and code execution.

CloudLink, versions 7.1.x and 8.x, contain an Improper check or handling of Exceptional Conditions Vulnerability in Cluster Component. A highly privileged malicious user with remote access could potentially exploit this vulnerability, leading to execute unauthorized actions and retrieve sensitive information from the database.

HCL Unica Centralized Offer Management is vulnerable to poor unhandled exceptions which exposes sensitive information. An attacker can exploit use this information to exploit known vulnerabilities launch targeted attacks, such as remote code execution or denial of service.