CWE-540

Authenticated Directory Traversal in WordPress Download Manager <= 3.1.24 allows authenticated (Contributor+) users to obtain sensitive configuration file information, as well as allowing Author+ users to perform XSS attacks, by setting Download template to a file containing configuration information or an uploaded JavaScript with an image extension This issue affects: WordPress Download Manager version 3.1.24 and prior versions.

A vulnerability in the web-based management interface of Cisco AsyncOS Software for Cisco Content Security Management Appliance (SMA), Cisco Email Security Appliance (ESA), and Cisco Web Security Appliance (WSA) could allow an authenticated, remote attacker to access sensitive information on an affected device. The vulnerability exists because confidential information is included in HTTP requests that are exchanged between the user and the device. An attacker could exploit this vulnerability by looking at the raw HTTP requests that are sent to the interface. A successful exploit could allow the attacker to obtain some of the passwords that are configured throughout the interface.

A vulnerability, which was classified as problematic, was found in keerti1924 PHP-MYSQL-User-Login-System 1.0. This affects an unknown part of the file login.sql. The manipulation leads to inclusion of sensitive information in source code. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-256035. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

The Sangfor Next-Gen Application Firewall version NGAF8.0.17 is vulnerable to a source code disclosure vulnerability. A remote and unauthenticated attacker can obtain PHP source code by sending an HTTP request with an invalid Content-Length field.

Inclusion of Sensitive Information in Source Code in SICK FTMg AIR FLOW SENSOR with Partnumbers 1100214, 1100215, 1100216, 1120114, 1120116, 1122524, 1122526 allows a remote attacker to gain information about valid usernames via analysis of source code.

Multiple vulnerabilities in Cisco Business 220 Series Smart Switches firmware could allow an attacker with Administrator privileges to access sensitive login credentials or reconfigure the passwords on the user account. For more information about these vulnerabilities, see the Details section of this advisory.

A vulnerability was found in 云课网络科技有限公司 Yunke Online School System up to 1.5.5. It has been declared as problematic. This vulnerability affects unknown code of the file /admin/educloud/videobind.html. The manipulation leads to inclusion of sensitive information in source code. The attack can be initiated remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. Upgrading to version 1.5.6 is able to address this issue. It is recommended to upgrade the affected component.

An exposure of sensitive information vulnerability has been reported to affect QNAP AI Core. If exploited, the vulnerability could allow remote attackers to compromise the security of the system. We have already fixed the vulnerability in the following version: QNAP AI Core 3.4.1 and later

A vulnerability has been found in keerti1924 Secret-Coder-PHP-Project 1.0 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /secret_coder.sql. The manipulation leads to inclusion of sensitive information in source code. The attack can be launched remotely. The complexity of an attack is rather high. The exploitation appears to be difficult. The exploit has been disclosed to the public and may be used. The associated identifier of this vulnerability is VDB-256315. NOTE: The vendor was contacted early about this disclosure but did not respond in any way.

Multiple vulnerabilities in Cisco Business 220 Series Smart Switches firmware could allow an attacker with Administrator privileges to access sensitive login credentials or reconfigure the passwords on the user account. For more information about these vulnerabilities, see the Details section of this advisory.

ChargePoint Home Flex Inclusion of Sensitive Information in Source Code Information Disclosure Vulnerability. This vulnerability allows remote attackers to disclose sensitive information on affected installations of ChargePoint Home Flex charging stations. Authentication is not required to exploit this vulnerability. The specific flaw exists within the genpw script. The issue results from the inclusion of a secret cryptographic seed value within the script. An attacker can leverage this vulnerability to disclose stored credentials, leading to further compromise. Was ZDI-CAN-26340.

Files in the source code contain login credentials for the admin user and the property configuration password, allowing an attacker to get full access to the application.

A inclusion of sensitive information in source code vulnerability in Fortinet FortiMonitorOnSight 7.2.4 through 7.2.7, FortiMonitorOnSight 7.2.0 through 7.2.2 may allow attacker to improper access control via <insert attack vector here>

Dell Secure Connect Gateway (SCG) Policy Manager, versions prior to 5.34.00.16, contains an Inclusion of Sensitive Information in Source Code vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information exposure.

An issue in Loggrove v.1.0 allows a remote attacker to obtain sensitive information via the read.py component.

IBM Datacap Navigator 9.1.5, 9.1.6, 9.1.7, 9.1.8, and 9.1.9 could allow an authenticated user to obtain sensitive information from source code that could be used in further attacks against the system. IBM X-Force ID: 295968.

In igloohome Smart Lock Mobile App versions 3.2.3 and prior, an Inclusion of Sensitive Information in Source Code vulnerability could allow an unauthorized actor to access functions or backend services that were not sufficiently protected by authentication controls.

A vulnerability was found in Vivotek NVR ND8422P, NVR ND9525P and NVR ND9541P 2.4.0.204/3.3.0.104/4.2.0.101. It has been classified as problematic. Affected is an unknown function of the component HTML Form Handler. The manipulation leads to inclusion of sensitive information in source code. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way.

Inclusion of Sensitive Information in Source Code vulnerability in TNB Mobile Solutions Cockpit Software allows Retrieve Embedded Sensitive Data. This issue affects Cockpit Software: before v0.251.1.

IBM Analytics Content Hub 2.0, 2.1, 2.2, and 2.3 is vulnerable to information exposure and further attacks due to an exposed JavaScript source map which could assist an attacker to read and debug JavaScript used in the application's API.

PMD is an extensible multilanguage static code analyzer. The passphrase for the PMD and PMD Designer release signing keys are included in jar published to Maven Central. The private key itself is not known to have been compromised itself, but given its passphrase is, it must also be considered potentially compromised. As a mitigation, both compromised keys have been revoked so that no future use of the keys are possible. Note, that the published artifacts in Maven Central under the group id net.sourceforge.pmd are not compromised and the signatures are valid.

An issue has been discovered in GitLab EE affecting all versions starting from 16.6 prior to 17.2.9, from 17.3 prior to 17.3.5, and from 17.4 prior to 17.4.2. It was possible for an unauthenticated attacker to determine the GitLab version number for a GitLab instance.

IBM Maximo Application Suite 8.10, 8.11, and 9.0 - Monitor Component stores source code on the web server that could aid in further attacks against the system.

IBM Cognos Analytics 12.1.0 through 12.1.3 FP1, and 12.0.4 through 12.0.4 FP2 stores sensitive information in source code could be used by an authenticated user in further attacks against the system.

Algernon is a small self-contained pure-Go web server. Prior to 1.17.7, when Algernon is invoked with a single file path instead of a directory, singleFileMode is set to true and debugMode is forcibly enabled. debugMode activates the PrettyError renderer, which on any Lua or template error response dumps the absolute path of the file that errored, complete byte contents of that file, and exception or parser error text. This response is served with HTTP 200 OK to whoever sent the request that triggered the error. Any client able to reach the server and able to provoke a runtime error in the served script obtains the full server-side source of that script and of any sibling Lua data file consulted during the request. This vulnerability is fixed in 1.17.7.

IBM OpenPages 8.3 and 9.0 potentially exposes information about client-side source code through use of JavaScript source maps to unauthorized users.

Bentley Systems iTwin Platform exposed a Cesium ion access token in the source of some web pages. An unauthenticated attacker could use this token to enumerate or delete certain assets. As of 2026-03-27, the token is no longer present in the web pages and cannot be used to enumerate or delete assets.

IBM Cognos Analytics 11.2.0, 11.2.1, 11.2.2, 11.2.3, 11.2.4, 12.0.0, 12.0.1, 12.0.2, 12.0.3, and 12.0.4 stores source code on the web server that could aid in further attacks against the system.

IBM Cognos Analytics Mobile 1.1 for iOS application could allow an attacker to reverse engineer the codebase to gain knowledge about the programming technique, interface, class definitions, algorithms and functions used due to weak obfuscation.

A vulnerability was identified in Intelbras TIP 125i 4.3.35/4.3.41. The affected element is an unknown function of the component Básico Page. Such manipulation leads to inclusion of sensitive information in source code. The attack can be launched remotely. A high complexity level is associated with this attack. The exploitability is described as difficult. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure.

Inclusion of sensitive information in the source code has been reported to affect certain QNAP switches running QSS. If exploited, this vulnerability allows attackers to read application data. This issue affects: QNAP Systems Inc. QSS versions prior to 1.0.3 build 20210505 on QSW-M2108-2C; versions prior to 1.0.3 build 20210505 on QSW-M2108-2S; versions prior to 1.0.3 build 20210505 on QSW-M2108R-2C; versions prior to 1.0.12 build 20210506 on QSW-M408.

IBM Planning Analytics Local 2.1.0 through 2.1.14 stores sensitive information in source code could be used in further attacks against the system.

IBM Security Verify Governance 10.0, Identity Manager could allow a local privileged user to obtain sensitive information from source code. IBM X-Force ID: 257769.

An API key is hardcoded and retrievable from the application package. Since Android applications can be reverse engineered, embedding sensitive API credentials directly in the client application may allow unauthorized users to extract and misuse the key.

API key is hardcoded and retrievable from the application package. Since Android applications can be reverse engineered, embedding sensitive API credentials directly in the client application may allow unauthorized users to extract and misuse the key.

Dell ECS, versions 3.8.1.0 through 3.8.1.7, and Dell ObjectScale versions prior to 4.2.0.0, contains an Inclusion of Sensitive Information in Source Code vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Information exposure.

Dell Storage Integration Tools for VMware (DSITV) and Dell Storage vSphere Client Plugin (DSVCP) versions prior to 6.1.1 and Replay Manager for VMware (RMSV) versions prior to 3.1.2 contain an information disclosure vulnerability. A local low-privileged malicious user could potentially exploit this vulnerability to retrieve an encryption key that could aid in further attacks.

WebDyne versions from 2.022 before 3.022 for Perl disclose application source to unauthenticated clients via the viewer in the default index page. WebDyne's wrapper scripts, such as webdyne.psgi, enable the built-in index page by default. Its source viewer returns files under the document root named in the source parameter of an HTMX request, including .psp, .pm and .pl files. A remote attacker can read the application's Perl code, including the __PERL__ blocks of .psp pages and any credentials they hold.