T1071.001

An Improper Authentication issue was discovered in Hikvision DS-2CD2xx2F-I Series V5.2.0 build 140721 to V5.4.0 build 160530, DS-2CD2xx0F-I Series V5.2.0 build 140721 to V5.4.0 Build 160401, DS-2CD2xx2FWD Series V5.3.1 build 150410 to V5.4.4 Build 161125, DS-2CD4x2xFWD Series V5.2.0 build 140721 to V5.4.0 Build 160414, DS-2CD4xx5 Series V5.2.0 build 140721 to V5.4.0 Build 160421, DS-2DFx Series V5.2.0 build 140805 to V5.4.5 Build 160928, and DS-2CD63xx Series V5.0.9 build 140305 to V5.3.5 Build 160106 devices. The improper authentication vulnerability occurs when an application does not adequately or correctly authenticate users. This may allow a malicious user to escalate his or her privileges on the system and gain access to sensitive information.

Langflow versions prior to 1.3.0 are susceptible to code injection in the /api/v1/validate/code endpoint. A remote and unauthenticated attacker can send crafted HTTP requests to execute arbitrary code.

Deserialization of untrusted data in on-premises Microsoft SharePoint Server allows an unauthorized attacker to execute code over a network. Microsoft is aware that an exploit for CVE-2025-53770 exists in the wild. Microsoft is preparing and fully testing a comprehensive update to address this vulnerability. In the meantime, please make sure that the mitigation provided in this CVE documentation is in place so that you are protected from exploitation.

Improper control of generation of code ('code injection') in Microsoft Office SharePoint allows an authorized attacker to execute code over a network.

A stack-based buffer overflow in Ivanti Connect Secure before version 22.7R2.5, Ivanti Policy Secure before version 22.7R1.2, and Ivanti Neurons for ZTA gateways before version 22.7R2.3 allows a remote unauthenticated attacker to achieve remote code execution.

Path Equivalence: 'file.Name' (Internal Dot) leading to Remote Code Execution and/or Information disclosure and/or malicious content added to uploaded files via write enabled Default Servlet in Apache Tomcat. This issue affects Apache Tomcat: from 11.0.0-M1 through 11.0.2, from 10.1.0-M1 through 10.1.34, from 9.0.0.M1 through 9.0.98. The following versions were EOL at the time the CVE was created but are known to be affected: 8.5.0 though 8.5.100. Other, older, EOL versions may also be affected. If all of the following were true, a malicious user was able to view security sensitive files and/or inject content into those files: - writes enabled for the default servlet (disabled by default) - support for partial PUT (enabled by default) - a target URL for security sensitive uploads that was a sub-directory of a target URL for public uploads - attacker knowledge of the names of security sensitive files being uploaded - the security sensitive files also being uploaded via partial PUT If all of the following were true, a malicious user was able to perform remote code execution: - writes enabled for the default servlet (disabled by default) - support for partial PUT (enabled by default) - application was using Tomcat's file based session persistence with the default storage location - application included a library that may be leveraged in a deserialization attack Users are recommended to upgrade to version 11.0.3, 10.1.35 or 9.0.99, which fixes the issue.

An OS Command Injection vulnerability in Ivanti Sentry before the R10.5.2, R10.6.2 and R10.7.1 versions allows a remote unauthenticated user to achieve root-level remote code execution

The identity authentication bypass vulnerability found in some Dahua products during the login process. Attackers can bypass device identity authentication by constructing malicious data packets.

Improper authentication in Microsoft Office SharePoint allows an unauthorized attacker to perform spoofing over a network.

Craft is a flexible, user-friendly CMS for creating custom digital experiences on the web and beyond. Starting from version 3.0.0-RC1 to before 3.9.15, 4.0.0-RC1 to before 4.14.15, and 5.0.0-RC1 to before 5.6.17, Craft is vulnerable to remote code execution. This is a high-impact, low-complexity attack vector. This issue has been patched in versions 3.9.15, 4.14.15, and 5.6.17, and is an additional fix for CVE-2023-41892.

GeoServer is an open source server that allows users to share and edit geospatial data. Prior to versions 2.22.6, 2.23.6, 2.24.4, and 2.25.2, multiple OGC request parameters allow Remote Code Execution (RCE) by unauthenticated users through specially crafted input against a default GeoServer installation due to unsafely evaluating property names as XPath expressions. The GeoTools library API that GeoServer calls evaluates property/attribute names for feature types in a way that unsafely passes them to the commons-jxpath library which can execute arbitrary code when evaluating XPath expressions. This XPath evaluation is intended to be used only by complex feature types (i.e., Application Schema data stores) but is incorrectly being applied to simple feature types as well which makes this vulnerability apply to **ALL** GeoServer instances. No public PoC is provided but this vulnerability has been confirmed to be exploitable through WFS GetFeature, WFS GetPropertyValue, WMS GetMap, WMS GetFeatureInfo, WMS GetLegendGraphic and WPS Execute requests. This vulnerability can lead to executing arbitrary code. Versions 2.22.6, 2.23.6, 2.24.4, and 2.25.2 contain a patch for the issue. A workaround exists by removing the `gt-complex-x.y.jar` file from the GeoServer where `x.y` is the GeoTools version (e.g., `gt-complex-31.1.jar` if running GeoServer 2.25.1). This will remove the vulnerable code from GeoServer but may break some GeoServer functionality or prevent GeoServer from deploying if the gt-complex module is needed.

An authentication bypass in Palo Alto Networks PAN-OS software enables an unauthenticated attacker with network access to the management web interface to gain PAN-OS administrator privileges to perform administrative actions, tamper with the configuration, or exploit other authenticated privilege escalation vulnerabilities like CVE-2024-9474 https://security.paloaltonetworks.com/CVE-2024-9474 . The risk of this issue is greatly reduced if you secure access to the management web interface by restricting access to only trusted internal IP addresses according to our recommended  best practice deployment guidelines https://live.paloaltonetworks.com/t5/community-blogs/tips-amp-tricks-how-to-secure-the-management-access-of-your-palo/ba-p/464431 . This issue is applicable only to PAN-OS 10.2, PAN-OS 11.0, PAN-OS 11.1, and PAN-OS 11.2 software. Cloud NGFW and Prisma Access are not impacted by this vulnerability.

CWP (aka Control Web Panel or CentOS Web Panel) before 0.9.8.1205 allows unauthenticated remote code execution via shell metacharacters in the t_total parameter in a filemanager changePerm request. A valid non-root username must be known.

A pre-authentication remote code execution vulnerability exists in React Server Components versions 19.0.0, 19.1.0, 19.1.1, and 19.2.0 including the following packages: react-server-dom-parcel, react-server-dom-turbopack, and react-server-dom-webpack. The vulnerable code unsafely deserializes payloads from HTTP requests to Server Function endpoints.

An Authentication Bypass Using an Alternate Path or Channel vulnerability [CWE-288] affecting FortiOS version 7.0.0 through 7.0.16 and FortiProxy version 7.0.0 through 7.0.19 and 7.2.0 through 7.2.12 allows a remote attacker to gain super-admin privileges via crafted requests to Node.js websocket module.

cPanel and WHM versions after 11.40 contain an authentication bypass vulnerability in the login flow that allows unauthenticated remote attackers to gain unauthorized access to the control panel.

n8n is an open source workflow automation platform. Versions starting with 0.211.0 and prior to 1.120.4, 1.121.1, and 1.122.0 contain a critical Remote Code Execution (RCE) vulnerability in their workflow expression evaluation system. Under certain conditions, expressions supplied by authenticated users during workflow configuration may be evaluated in an execution context that is not sufficiently isolated from the underlying runtime. An authenticated attacker could abuse this behavior to execute arbitrary code with the privileges of the n8n process. Successful exploitation may lead to full compromise of the affected instance, including unauthorized access to sensitive data, modification of workflows, and execution of system-level operations. This issue has been fixed in versions 1.120.4, 1.121.1, and 1.122.0. Users are strongly advised to upgrade to a patched version, which introduces additional safeguards to restrict expression evaluation. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only; and/or deploy n8n in a hardened environment with restricted operating system privileges and network access to reduce the impact of potential exploitation. These workarounds do not fully eliminate the risk and should only be used as short-term measures.

Roundcube Webmail before 1.5.10 and 1.6.x before 1.6.11 allows remote code execution by authenticated users because the _from parameter in a URL is not validated in program/actions/settings/upload.php, leading to PHP Object Deserialization.

marimo is a reactive Python notebook. Prior to 0.23.0, Marimo has a Pre-Auth RCE vulnerability. The terminal WebSocket endpoint /terminal/ws lacks authentication validation, allowing an unauthenticated attacker to obtain a full PTY shell and execute arbitrary system commands. Unlike other WebSocket endpoints (e.g., /ws) that correctly call validate_auth() for authentication, the /terminal/ws endpoint only checks the running mode and platform support before accepting connections, completely skipping authentication verification. This vulnerability is fixed in 0.23.0.

Langflow is a tool for building and deploying AI-powered agents and workflows. In versions prior to 1.9.0, the POST /api/v1/build_public_tmp/{flow_id}/flow endpoint allows building public flows without requiring authentication. When the optional data parameter is supplied, the endpoint uses attacker-controlled flow data (containing arbitrary Python code in node definitions) instead of the stored flow data from the database. This code is passed to exec() with zero sandboxing, resulting in unauthenticated remote code execution. This is distinct from CVE-2025-3248, which fixed /api/v1/validate/code by adding authentication. The build_public_tmp endpoint is designed to be unauthenticated (for public flows) but incorrectly accepts attacker-supplied flow data containing arbitrary executable code. This issue has been fixed in version 1.9.0.

Use-after-free vulnerability in Microsoft Internet Explorer 6, 7, and 8 allows remote attackers to execute arbitrary code via vectors related to Cascading Style Sheets (CSS) token sequences and the clip attribute, aka an "invalid flag reference" issue or "Uninitialized Memory Corruption Vulnerability," as exploited in the wild in November 2010.

Livewire is a full-stack framework for Laravel. In Livewire v3 up to and including v3.6.3, a vulnerability allows unauthenticated attackers to achieve remote command execution in specific scenarios. The issue stems from how certain component property updates are hydrated. This vulnerability is unique to Livewire v3 and does not affect prior major versions. Exploitation requires a component to be mounted and configured in a particular way, but does not require authentication or user interaction. This issue has been patched in Livewire v3.6.4. All users are strongly encouraged to upgrade to this version or later as soon as possible. No known workarounds are available.

WordPress 6.9.x before 6.9.5 and 7.0.x before 7.0.2 is affected by a REST API batch endpoint route confusion issue which, combined with the author__not_in WP_Query SQL Injection (CVE-2026-60137), could allow an attacker to perform SQL Injection and achieve Remote Code Execution.

Vulnerability in the PeopleSoft Enterprise PeopleTools product of Oracle PeopleSoft (component: Updates Environment Management). Supported versions that are affected are 8.61 and 8.62. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise PeopleSoft Enterprise PeopleTools. Successful attacks of this vulnerability can result in takeover of PeopleSoft Enterprise PeopleTools. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H).

An Improper Authentication vulnerability in the SSLVPN authentication mechanism allows a remote attacker to bypass authentication.

A missing authentication for critical function in FortiManager 7.6.0, FortiManager 7.4.0 through 7.4.4, FortiManager 7.2.0 through 7.2.7, FortiManager 7.0.0 through 7.0.12, FortiManager 6.4.0 through 6.4.14, FortiManager 6.2.0 through 6.2.12, Fortinet FortiManager Cloud 7.4.1 through 7.4.4, FortiManager Cloud 7.2.1 through 7.2.7, FortiManager Cloud 7.0.1 through 7.0.12, FortiManager Cloud 6.4.1 through 6.4.7 allows attacker to execute arbitrary code or commands via specially crafted requests.

A privilege escalation vulnerability in Palo Alto Networks PAN-OS software allows a PAN-OS administrator with access to the management web interface to perform actions on the firewall with root privileges. Cloud NGFW and Prisma Access are not impacted by this vulnerability.

A path traversal vulnerability affecting the Windows version of WinRAR allows the attackers to execute arbitrary code by crafting malicious archive files. This vulnerability was exploited in the wild and was discovered by Anton Cherepanov, Peter Košinár, and Peter Strýček from ESET.

The Metro Development Server, which is opened by the React Native Community CLI, binds to external interfaces by default. The server exposes an endpoint that is vulnerable to OS command injection. This allows unauthenticated network attackers to send a POST request to the server and run arbitrary executables. On Windows, the attackers can also execute arbitrary shell commands with fully controlled arguments.

Authentication bypass vulnerabilities in the GlobalProtect portal and gateway of Palo Alto Networks PAN-OS® software allows the attacker to bypass security restrictions and establish an unauthorized VPN connection. Panorama and Cloud NGFW are not impacted by these issues.

Gladinet CentreStack through 16.1.10296.56315 (fixed in 16.4.10315.56368) has a deserialization vulnerability due to the CentreStack portal's hardcoded machineKey use, as exploited in the wild in March 2025. This enables threat actors (who know the machineKey) to serialize a payload for server-side deserialization to achieve remote code execution. NOTE: a CentreStack admin can manually delete the machineKey defined in portal\web.config.

A relative path traversal vulnerability in Fortinet FortiWeb 8.0.0 through 8.0.1, FortiWeb 7.6.0 through 7.6.4, FortiWeb 7.4.0 through 7.4.9, FortiWeb 7.2.0 through 7.2.11, FortiWeb 7.0.0 through 7.0.11 may allow an attacker to execute administrative commands on the system via crafted HTTP or HTTPS requests.

May 2026: This security advisory provides the details and fix information for a vulnerability that was discovered and fixed after the was disclosed in February 2026. This new advisory is for a new vulnerability in the control connection handshaking. The section of this advisory includes Show Control Connections guidance to help with system checks.  A vulnerability in the peering authentication in Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an unauthenticated, remote attacker to bypass authentication and obtain administrative privileges on an affected system. This vulnerability exists because the peering authentication mechanism in an affected system is not working properly. An attacker could exploit this vulnerability by sending crafted requests to the affected system. A successful exploit could allow the attacker to log in to an affected Cisco Catalyst SD-WAN Controller as an internal, high-privileged, non-root user account. Using this account, the attacker could access NETCONF, which would then allow the attacker to manipulate network configuration for the SD-WAN fabric.

RARLAB WinRAR Directory Traversal Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of RARLAB WinRAR. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file. The specific flaw exists within the handling of file paths within archive files. A crafted file path can cause the process to traverse to unintended directories. An attacker can leverage this vulnerability to execute code in the context of the current user. Was ZDI-CAN-27198.

BeyondTrust Remote Support (RS) and certain older versions of Privileged Remote Access (PRA) contain a critical pre-authentication remote code execution vulnerability. By sending specially crafted requests, an unauthenticated remote attacker may be able to execute operating system commands in the context of the site user.

SolarWinds Web Help Desk was found to be susceptible to an unauthenticated AjaxProxy deserialization remote code execution vulnerability that, if exploited, would allow an attacker to run commands on the host machine. This vulnerability is a patch bypass of CVE-2024-28988, which in turn is a patch bypass of CVE-2024-28986.

A vulnerability in the peering authentication in Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an unauthenticated, remote attacker to bypass authentication and obtain administrative privileges on an affected system. This vulnerability exists because the peering authentication mechanism in an affected system is not working properly. An attacker could exploit this vulnerability by sending crafted requests to an affected system. A successful exploit could allow the attacker to log in to an affected Cisco Catalyst SD-WAN Controller as an internal, high-privileged, non-root user account. Using this account, the attacker could access NETCONF, which would then allow the attacker to manipulate network configuration for the SD-WAN fabric. 

A vulnerability in SP Page Builder for Joomla allows unauthenticated users to upload arbitrary files, ultimately resulting in the upload and execution of PHP code.

Update: On November 5, 2025, Cisco became aware of a new attack variant against devices running Cisco Secure ASA Software or Cisco Secure FTD Software releases that are affected by CVE-2025-20333 and CVE-2025-20362. This attack can cause unpatched devices to unexpectedly reload, leading to denial of service (DoS) conditions. Cisco strongly recommends that all customers upgrade to the fixed software releases that are listed in the Fixed Software ["#fs"] section of this advisory. A vulnerability in the VPN web server of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to access restricted URL endpoints that are related to remote access VPN that should otherwise be inaccessible without authentication. This vulnerability is due to improper validation of user-supplied input in HTTP(S) requests. An attacker could exploit this vulnerability by sending crafted HTTP requests to a targeted web server on a device. A successful exploit could allow the attacker to access a restricted URL without authentication.

A code injection in Ivanti Endpoint Manager Mobile allowing attackers to achieve unauthenticated remote code execution.

Insufficient input validation in NetScaler ADC and NetScaler Gateway when configured as a SAML IDP leading to memory overread

Mismatched length fields in Zlib compressed protocol headers may allow a read of uninitialized heap memory by an unauthenticated client. This issue affects all MongoDB Server v7.0 prior to 7.0.28 versions, MongoDB Server v8.0 versions prior to 8.0.17, MongoDB Server v8.2 versions prior to 8.2.3, MongoDB Server v6.0 versions prior to 6.0.27, MongoDB Server v5.0 versions prior to 5.0.32, MongoDB Server v4.4 versions prior to 4.4.30, MongoDB Server v4.2 versions greater than or equal to 4.2.0, MongoDB Server v4.0 versions greater than or equal to 4.0.0, and MongoDB Server v3.6 versions greater than or equal to 3.6.0.

A logic flow weakness in Remote Access and Mobile Access certificate validation in deprecated IKEv1 key exchange allows an unauthenticated remote attacker to bypass user authentication and establish a remote access VPN connection without a valid user password.

A code injection in Ivanti Endpoint Manager Mobile allowing attackers to achieve unauthenticated remote code execution.

A Cross-Site Scripting vulnerability in Roundcube through 1.5.7 and 1.6.x through 1.6.7 allows a remote attacker to steal and send emails of a victim via a crafted e-mail message that abuses a Desanitization issue in message_body() in program/actions/mail/show.php.

WordPress 6.8.x before 6.8.6, 6.9.x before 6.9.5, and 7.0.x before 7.0.2 does not properly sanitise the author__not_in parameter of WP_Query, which could allow SQL Injection when a plugin or theme passes untrusted input to the parameter.

Reliance on untrusted inputs in a security decision in Microsoft Office allows an unauthorized attacker to bypass a security feature locally.

Improper neutralization of input during web page generation ('cross-site scripting') in Microsoft Exchange Server allows an unauthorized attacker to perform spoofing over a network.

A vulnerability in the JCE editor extension for Joomla allows the creation of new editor profiles for unauthenticated users, ultimately resulting in PHP code upload and execution.

Langflow exec_globals Inclusion of Functionality from Untrusted Control Sphere Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Langflow. Authentication is not required to exploit this vulnerability. The specific flaw exists within the handling of the exec_globals parameter provided to the validate endpoint. The issue results from the inclusion of a resource from an untrusted control sphere. An attacker can leverage this vulnerability to execute code in the context of root. Was ZDI-CAN-27325.

Rockwell Automation Studio 5000 Logix Designer Versions 21 and later, and RSLogix 5000 Versions 16 through 20 use a key to verify Logix controllers are communicating with Rockwell Automation CompactLogix 1768, 1769, 5370, 5380, 5480: ControlLogix 5550, 5560, 5570, 5580; DriveLogix 5560, 5730, 1794-L34; Compact GuardLogix 5370, 5380; GuardLogix 5570, 5580; SoftLogix 5800. Rockwell Automation Studio 5000 Logix Designer Versions 21 and later and RSLogix 5000: Versions 16 through 20 are vulnerable because an unauthenticated attacker could bypass this verification mechanism and authenticate with Rockwell Automation CompactLogix 1768, 1769, 5370, 5380, 5480: ControlLogix 5550, 5560, 5570, 5580; DriveLogix 5560, 5730, 1794-L34; Compact GuardLogix 5370, 5380; GuardLogix 5570, 5580; SoftLogix 5800.

Trivy is a security scanner. On March 19, 2026, a threat actor used compromised credentials to publish a malicious Trivy v0.69.4 release, force-push 76 of 77 version tags in `aquasecurity/trivy-action` to credential-stealing malware, and replace all 7 tags in `aquasecurity/setup-trivy` with malicious commits. This incident is a continuation of the supply chain attack that began in late February 2026. Following the initial disclosure on March 1, credential rotation was performed but was not atomic (not all credentials were revoked simultaneously). The attacker could have use a valid token to exfiltrate newly rotated secrets during the rotation window (which lasted a few days). This could have allowed the attacker to retain access and execute the March 19 attack. Affected components include the `aquasecurity/trivy` Go / Container image version 0.69.4, the `aquasecurity/trivy-action` GitHub Action versions 0.0.1 – 0.34.2 (76/77), and the`aquasecurity/setup-trivy` GitHub Action versions 0.2.0 – 0.2.6, prior to the recreation of 0.2.6 with a safe commit. Known safe versions include versions 0.69.2 and 0.69.3 of the Trivy binary, version 0.35.0 of trivy-action, and version 0.2.6 of setup-trivy. Additionally, take other mitigations to ensure the safety of secrets. If there is any possibility that a compromised version ran in one's environment, all secrets accessible to affected pipelines must be treated as exposed and rotated immediately. Check whether one's organization pulled or executed Trivy v0.69.4 from any source. Remove any affected artifacts immediately. Review all workflows using `aquasecurity/trivy-action` or `aquasecurity/setup-trivy`. Those who referenced a version tag rather than a full commit SHA should check workflow run logs from March 19–20, 2026 for signs of compromise. Look for repositories named `tpcp-docs` in one's GitHub organization. The presence of such a repository may indicate that the fallback exfiltration mechanism was triggered and secrets were successfully stolen. Pin GitHub Actions to full, immutable commit SHA hashes, don't use mutable version tags.

An Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability [CWE-78] vulnerability in Fortinet FortiWeb 8.0.0 through 8.0.1, FortiWeb 7.6.0 through 7.6.5, FortiWeb 7.4.0 through 7.4.10, FortiWeb 7.2.0 through 7.2.11, FortiWeb 7.0.0 through 7.0.11 may allow an authenticated attacker to execute unauthorized code on the underlying system via crafted HTTP requests or CLI commands.

TP-Link TL-WR940N V2/V4, TL-WR841N V8/V10, and TL-WR740N V1/V2 was discovered to contain a command injection vulnerability via the component /userRpm/WlanNetworkRpm .

A vulnerability in the VPN web server of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, remote attacker to execute arbitrary code on an affected device. This vulnerability is due to improper validation of user-supplied input in HTTP(S) requests. An attacker with valid VPN user credentials could exploit this vulnerability by sending crafted HTTP requests to an affected device. A successful exploit could allow the attacker to execute arbitrary code as root, possibly resulting in the complete compromise of the affected device.

On ASUS RT-AX55 3.0.0.4.386.51598 devices, authenticated attackers can perform OS command injection via the /start_apply.htm qos_bw_rulelist parameter. NOTE: for the similar "token-generated module" issue, see CVE-2023-41345; for the similar "token-refresh module" issue, see CVE-2023-41346; for the similar "check token module" issue, see CVE-2023-41347; and for the similar "code-authentication module" issue, see CVE-2023-41348.

Out-of-bounds write in libimagecodec.quram.so prior to SMR Apr-2025 Release 1 allows remote attackers to execute arbitrary code.

Deserialization of untrusted data in Microsoft Office SharePoint allows an unauthorized attacker to execute code over a network.

A vulnerability in Cisco Catalyst SD-WAN Software could allow an unauthenticated, remote attacker to view sensitive information on an affected system. This vulnerability is due to insufficient file system restrictions. An authenticated attacker with netadmin privileges could exploit this vulnerability by accessing the vshell of an affected system. A successful exploit could allow the attacker to read sensitive information on the underlying operating system.

Trimble Cityworks versions prior to 15.8.9 and Cityworks with office companion versions prior to 23.10 are vulnerable to a deserialization vulnerability. This could allow an authenticated user to perform a remote code execution attack against a customer’s Microsoft Internet Information Services (IIS) web server.

A vulnerability in the web-based management interface of Cisco Secure Firewall Management Center (FMC) Software could allow an unauthenticated, remote attacker to execute arbitrary Java code as root on an affected device. This vulnerability is due to insecure deserialization of a user-supplied Java byte stream. An attacker could exploit this vulnerability by sending a crafted serialized Java object to the web-based management interface of an affected device. A successful exploit could allow the attacker to execute arbitrary code on the device and elevate privileges to root. Note: If the FMC management interface does not have public internet access, the attack surface that is associated with this vulnerability is reduced.

A critical remote code execution (RCE) vulnerability has been reported in PTC Windchill PDMlink and PTC FlexPLM. The vulnerability may be exploited through the deserialization of untrusted data.  * This advisory also applies to all CPS versions * The identified vulnerability also impacts Windchill and FlexPLM releases prior to 11.0 M030

Langflow is a tool for building and deploying AI-powered agents and workflows. Prior to 1.9.1, an Insecure Direct Object Reference (IDOR) vulnerability in /api/v1/responses endpoint allows an authenticated attacker to execute any flow belonging to another user by specifying the victim's flow ID in the request. This vulnerability is fixed in 1.9.1.

A vulnerability in the CLI of Cisco Catalyst SD-WAN Controller, formerly SD-WAN vSmart, Cisco Catalyst SD-WAN Manager, formerly SD-WAN vManage, and Cisco Catalyst SD-WAN Validator, formerly SD-WAN vBond, could allow an authenticated, local attacker to execute arbitrary commands as root by supplying a crafted file to the affected system. This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by uploading a crafted file to the affected system. A successful exploit could allow the attacker to perform command injection attacks on an affected system and elevate their privileges as the root user. To exploit this vulnerability, the attacker must have netadmin privileges on the affected system. This would require valid credentials or exploitation of or . Cisco is not aware of successful exploitation by other methods. Cisco has observed limited cases where the exploitation of this bug resulted in a configuration change pushed to edge devices. Cisco recommends that customers upgrade to the fixed software that is documented in the that was published on May 14, 2026, and verify the configuration of the edge devices.

A vulnerability in the API of Cisco Catalyst SD-WAN Manager could allow an authenticated, remote attacker to overwrite arbitrary files on the local file system. To exploit this vulnerability, the attacker must have valid read-only credentials with API access on the affected system. This vulnerability is due to improper file handling on the API interface of an affected system. An attacker could exploit this vulnerability by uploading a malicious file on the local file system. A successful exploit could allow the attacker to overwrite arbitrary files on the affected system and gain vmanage user privileges.

Zimbra Collaboration (ZCS) 10 before 10.0.18 and 10.1 before 10.1.13 allows Classic UI stored XSS via Cascading Style Sheets (CSS) @import directives in an HTML e-mail message.

An improper access control vulnerability has been identified in the SonicWall SonicOS management access, potentially leading to unauthorized resource access and in specific conditions, causing the firewall to crash. This issue affects SonicWall Firewall Gen 5 and Gen 6 devices, as well as Gen 7 devices running SonicOS 7.0.1-5035 and older versions.

An issue was discovered in router/upnp/src/ssdp.c in DD-WRT before 45724. An unsafe strcpy in the UPnP handling functionality allows an unauthenticated remote attacker to send a request that would overflow an internal fixed buffer. Exploitation requires the DD-WRT user to enable UPnP (which is off by default, and only listens on internal interfaces by default). This occurs in ssdp_msearch (reachable by an M-SEARCH request).

SimpleHelp versions 5.5.15 and prior and 6.0 pre-release versions contain an authentication bypass vulnerability in the OIDC authentication flow. When OIDC authentication is configured, identity tokens submitted during login are accepted without verifying their cryptographic signature. In a vulnerable configuration, a remote, unauthenticated attacker can submit a forged token containing arbitrary identity claims to obtain a fully authenticated technician session. In some configurations, this may also allow bypass of multi-factor authentication. No user interaction is required.

An integer overflow was addressed with improved input validation. This issue is fixed in tvOS 15.2, macOS Monterey 12.1, Safari 15.2, iOS 15.2 and iPadOS 15.2, watchOS 8.3. Processing maliciously crafted web content may lead to arbitrary code execution.

A vulnerability in the Data Collection Agent (DCA) feature of Cisco Catalyst SD-WAN Manager could allow an unauthenticated, remote attacker to gain DCA user privileges on an affected system. This vulnerability is due to the presence of a credential file for the DCA user on an affected system. An attacker could exploit this vulnerability by sending a crafted HTTP request and reading the file that contains the DCA password from that affected system. A successful exploit could allow the attacker to access another affected system and gain DCA user privileges. Note: Cisco Catalyst SD-WAN Manager releases 20.18 and later are not affected by this vulnerability.

An incomplete patch for CVE-2026-18556 allows for authentication bypass and account takeover in N-central Versions through 2026.3.1

An issue was discovered in Zimbra Collaboration (ZCS) 9.0 and 10.0 and 10.1. A stored cross-site scripting (XSS) vulnerability exists in the Classic Web Client due to insufficient sanitization of HTML content in ICS files. When a user views an e-mail message containing a malicious ICS entry, its embedded JavaScript executes via an ontoggle event inside a <details> tag. This allows an attacker to run arbitrary JavaScript within the victim's session, potentially leading to unauthorized actions such as setting e-mail filters to redirect messages to an attacker-controlled address. As a result, an attacker can perform unauthorized actions on the victim's account, including e-mail redirection and data exfiltration.

The issue was addressed with improved bounds checks. This issue is fixed in tvOS 15.6, watchOS 8.7, iOS 15.6 and iPadOS 15.6, macOS Monterey 12.5, Safari 15.6. Processing web content may lead to arbitrary code execution.

Quest KACE Systems Management Appliance (SMA) 13.0.x before 13.0.385, 13.1.x before 13.1.81, 13.2.x before 13.2.183, 14.0.x before 14.0.341 (Patch 5), and 14.1.x before 14.1.101 (Patch 4) contains an authentication bypass vulnerability that allows attackers to impersonate legitimate users without valid credentials. The vulnerability exists in the SSO authentication handling mechanism and can lead to complete administrative takeover.

When a BIG-IP APM access policy is configured on a virtual server, specific malicious traffic can lead to Remote Code Execution (RCE).   Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated.

Inappropriate implementation in V8 in Google Chrome prior to 146.0.7680.75 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High)

Out of bounds write in Skia in Google Chrome prior to 146.0.7680.75 allowed a remote attacker to perform out of bounds memory access via a crafted HTML page. (Chromium security severity: High)

A use-after-free issue was addressed with improved memory management. This issue is fixed in iOS 17 and iPadOS 17, iOS 15.8.7 and iPadOS 15.8.7. An app may be able to execute arbitrary code with kernel privileges.

Memory corruption while using alignments for memory allocation.

Authentication bypass using an alternate path or channel vulnerability in N-able N-central allows Authentication Bypass. This issue affects N-central: through 2026.1.

Use after free in Windows Ancillary Function Driver for WinSock allows an authorized attacker to elevate privileges locally.